| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| Baybond® PU 330 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinfor...view more Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent film-forming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 403 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± ...view more Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± 1, a flow time at 23°C, (4mmcup) of 11-18, and a pH value at 20°C (supply form) of 6.0-8.0. Baybond® PU 403 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 403 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. The mechanical film properties of the product are enhanced by post-crosslinking at temperatures from 170°C for a duration of 30 minutes. Baybond® PU 403 is also very stable against shear forces. view less | |
| Baybond® PU 405 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125...view more Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis. view less | |
| Baybond® PU 406 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a f...view more Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a flow time at 23°C, (4mmcup) of 10-22, and a pH value at 20°C, (supply form) of 5.5-7.5. view less | |
| Baybond® PU 407 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...view more Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. view less | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...view more Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. view less | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...view more Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. view less | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...view more Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. view less | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...view more Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. view less | |
| Desmodur® 44 M Flakes | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation o...view more Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins. This product has a 4,4'-MDI of minimum 98.2%, a 2,4'-MDI of maximum 2.8, and a hydrolysable chlorine content of maximum 50mg/kg. view less | |
| Desmophen® 1100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1100 is a branched polyester bearing hydroxyl groups that is a solvent-free saturated polyester resin, used for clear and pigmented two-component polyurethane coatings. Desmophen® 1100 is used alone or in combination with other Desmophen® grade...view more Desmophen® 1100 is a branched polyester bearing hydroxyl groups that is a solvent-free saturated polyester resin, used for clear and pigmented two-component polyurethane coatings. Desmophen® 1100 is used alone or in combination with other Desmophen® grades to formulate two-pack PU coatings for wood finishing. This product has a viscosity at 23°C of 30,500 ± 5,500 mPa·s, a pour point of approx. -3°C, and a water content of ≤ 0.1%. view less | |
| Desmophen® 1200 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1200 BA is a slightly branched, hydroxyl-bearing polyesters that is ideally used in the formulation of lfexible polyurethane coatings. This product contains a non-volatile content (2g resin/2ml toluene/1h/125°C/convection oven) of 60 ± 1%, a hy...view more Desmophen® 1200 BA is a slightly branched, hydroxyl-bearing polyesters that is ideally used in the formulation of lfexible polyurethane coatings. This product contains a non-volatile content (2g resin/2ml toluene/1h/125°C/convection oven) of 60 ± 1%, a hydroxyl content of 3.0 ± 0.2%, and a flash point of approx. 34°C. Clear and pigmented combinations of Desmophen® 1200 BA and more highly branched Desmophen® grades are reacted with Desmodur® L, HL and IL to formulate coatings for substrates such as metal, wood and various plastics. When combined with Desmophen® 1700, Desmophen® 1200 BA can be used to formulate coatings for flexible substrates such as rubber. view less | |
| Desmophen® 1300 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1...view more Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1, a viscosity at 23°C of 1,000 ± 200 mPa·s, and an equivalent weight of approx. 530. Desmophen® 1300 BA is especially suitable for the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. view less | |
| Desmophen® 1300 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 m...view more Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 mPa·s. Desmophen® 1300 EA is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. view less | |
| Desmophen® 1300 PR 75 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 PR 75 X is a hydroxyl-bearing polyester. It is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. | |
| Desmophen® 1300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g r...view more Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 75 ± 1. Desmophen® 1300 X is especially suitable for the formulation of fast-drying two-pack systems. These are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. view less | |
| Desmophen® 1388 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1388 EA is a fatty acid-modified, saturated polyester resin, used as a coreactant for Desmodur® L 75, IL, HL and N 75 for the formulation of two-component polyurethane coatings. This product has a non-volatile content (2g resin/2ml toluene/1h a...view more Desmophen® 1388 EA is a fatty acid-modified, saturated polyester resin, used as a coreactant for Desmodur® L 75, IL, HL and N 75 for the formulation of two-component polyurethane coatings. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 71.0 ± 1.5, an iodine color value of < 5, and an equivalent weight of approx. 360. When used in combination with Desmodur® IL and L 75, or even better with mixtures thereof, Desmophen® 1388 EA is particularly well suited for use in the formulation of sandable wood primers with good flexibility, adhesion and overcoatability. When used in combination with Desmodur® L 75 or N 75, it can be used for the formulation of topcoats with good properties with respect to leveling, body, color brilliance, polishability and scratch resistance. view less | |
| Desmophen® 1400 PR 75% MIBK | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding seal...view more Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding sealers and two-component clear and pigmented top coats for wood. It can be also used in coating systems for metal and plastics. This product has an iodine color value (50% solution) of < 5, a flash point of < 3°C, and a viscosity at 23°C of 13.000 ± 2.000 mPa·s. view less | |
| Desmophen® 1652 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C...view more Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C of 11,000 ± 2,000 mPa·s. Desmophen® 1652 is used in combination with Desmodur® VL to formulate flexible solvent-free coatings and sealers. If Desmodur® L or HL are used, the formulations will only yield a drying film if they are greatly overcrosslinked. view less | |
| Desmophen® 1700 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent ...view more Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent weight of approx. 1310, a viscosity at 23°C of 17,500 ± 2,500 mPa·s, and a pour point of approx. -5°C. Combinations of Desmophen® 1700 with various polyisocyanates yield highly flexible coatings. For this reason, the product is normally used as the flexibilizing component in combination with other Desmophen® grades. In certain combinations, e.g. with Desmophen® 800, the addition of Desmophen® 1700 increases the toughness and resistance to wear and abrasion of the paint films. Such combinations can be used to coat furniture, floors and parquet. view less | |
| Desmophen® 1800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C,...view more Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C, and a density at 20°C of approx. 1.19g/ml. In combination with Desmodur® L, Desmophen® 1800 yields highly flexible coatings for rubber and plastics and high-build flexible finishes. If necessary, it can be combined with other Desmophen® grades. view less | |
| Desmophen® 631 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 631 MPA is a saturated polyester resin. | |
| Desmophen® 650 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. Th...view more Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. They also have very good resistance to chemicals and high abrasion resistance. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 64±2%, a flash point of approx. 46°C, and a hazen color value of ≤ 100. view less | |
| Desmophen® 650A 65 PMA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings. | |
| Desmophen® 651 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very g...view more Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 65±1%, a flash point of approx. 40°C, and a hazen color value of ≤ 100. view less | |
| Desmophen® 651 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemical...view more Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 67±1%, a flash point of approx. 32°C, and an acid value of ≤ 3mg KOH/g. view less | |
| Desmophen® 670 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics an...view more Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 can be used as a flexibilizer in other DD coating systems. This product has a viscosity at 23°C (80% in butyl acetate) of 2,200 ± 400 mPa·s, a pour point of approx. + 8°C, and an acid value of 2 ± 1mg KOH/g. view less | |
| Desmophen® 670 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are ma...view more Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 BA can also be added to other two-component polyurethane systems to improve their flexibility. This product has a flash point of approx. 32°C, an acid value of 1.8±1mg KOH/g, and a non-volatile content (1g resin/1h 125°C, convection oven) of 80±1%. view less | |
| Desmophen® 680 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be use...view more Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying two-component coatings. This product as a viscosity at 23°C of 3,000 ± 500 mPa·s, a non-volatile content (2g resin/2ml toluene/1h 125°C, convection oven) of 70±1%, and a flash point of approx. 32°C. Desmophen® 680 BA is a hard co-reactant for use with Desmodur® N. The drying properties of this combination are comparable with those of the acrylic Desmophen® resin/Desmodur® N systems developed specially for automotive repair paints. It is therefore particularly suitable for the formulation of air-drying automotive and industrial coatings. Coatings crosslinked with Desmodur® L and HL are particularly fast-drying, making them suitable for applications such as paper finishing. view less | |
| Desmophen® 680 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in comb...view more Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying, two-component coatings. Desmophen® 680 X is a hard co-reactant for Desmodur® N grades. The drying of such combinations is comparable with that of the acrylic resin/Desmodur® N systems developed specially for vehicle repair. They are therefore particularly suitable for use in the formulation of air-drying automotive and industrial coatings. Crosslinking with Desmodur® L and HL results in very fast-drying coatings which can be used in, for example, paper finishing. view less | |
| Desmophen® 690 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value o...view more Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value of ≤ 6%, a hydroxyl content of 1.4 ± 0.2%, and a non-volatile content (1g resin/1h 125°C, convection oven) 70 ± 2%. view less | |
| Desmophen® 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropyla...view more Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropylacetate-2) of 850 ± 150 mPa·s, and an equivalent weight of approx. 200. With Desmodur® L as the reaction partner, Desmophen® 800 yields hard films with good chemical resistance. These coatings are also characterized by high impact resistance, toughness and abrasion resistance. As a combination polyol with Desmophen® 1100, Desmophen® 800 can be used to formulate floor coatings with high abrasion resistance. view less | |
| Desmophen® 800 80% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatil...view more Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 80 ± 1%. When combined with Desmodur® L, Desmophen® 800 80 % BA yields hard and chemically resistant films. The coatings are also caracterised by their high impact strength, toughness and resistance to abrasion. When combined with Desmophen® 1100, it yields floor coatings with high resistance to abrasion. view less | |
| Desmophen® 800 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60...view more Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60°C, a flash point of approx. -4°C, an equivalent weight of approx. 320, and hazen color value of ≤ 250. view less | |
| Desmophen® 800 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When c...view more Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When combined with Desmodur® L, Desmophen® 800 MPA yields hard and chemically resistant films. The coatings are also characterised by their high impact strength, toughness and resistance to abrasion. A combination with Desmophen® 1100 yields floor coatings with high resistance to abrasion. view less | |
| Desmophen® 850 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coat...view more Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coatings. This product has a pour point of approx. +10°C, a hazen color value (70% in 1-methoxypropylacetate-2) of ≤ 200, and a viscosity at 75°C of 410 ± 50 mPa·s. view less | |
| Desmophen® C 1100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of...view more Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of approx. 0.1mg KOH/g, and a viscosity at 23°C of 3,200 ± 1,300 mPa·s. In combination with polyisocyanates as a high-grade building block for the formulation of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. view less | |
| Desmophen® C 1200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability,...view more Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. This product has a viscosity at 23°C of 16,500 ± 2,500 mPa·s, a hazen color value of < 150, and a hydroxyl content of 1.7 ± 0.2%. view less | |
| Desmophen® C 2100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good...view more Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. It has a hydroxyl content of 3.3 ± 0.3%, viscosity at 75°C of 410 ± 110 mPa·s, and an equivalent weight of approx. 500. view less | |
| Desmophen® C XP 2716 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very goo...view more Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a hydroxyl content of approx. 5.2%, an acid number of approx. 0.1mg KOH/g, and a water content of approx. 0.05%. view less | |
| Desmophen® PL 300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ c...view more Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ convection oven) of 60 ± 1, an iodine color value, 50 % resin of max. 5, and a viscosity at 23°C of 5,350 ± 150 mPa·s. Desmophen® PL 300 is highly reactive and yields good transparency, level-ling and gloss. It can also be used to formulate primers with a higher solids content than those based on highly condensed resins. In such coatings, the product yields good overcoatability and early sand-ability. view less | |
| Desmophen® PL 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This prod...view more Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of approx. 70%, a hydroxyl content (supply form) of approx. 2.5%, and an iodine color value (50% resin) of max. 2. Desmophen® PL 800 is characterised by excellent pigment wetting and gloss. It is therefore especially suitable for the formulation of high-gloss pigmented polyurethane finishes. Coatings formulated with Desmophen® PL 800 have low application viscosity and a long pot life, good yellowing resistance, excellent elasticity and high body. Generally speaking, the product has good compatibility. However, this should be tested in each individual case. view less | |
| Desmophen® PL 817 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of...view more Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of 10,000 ± 2,000 mPa·s, a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 75 ± 1, and an acid value (supply form) of 3.3 ± 0.2%. Desmophen® PL 817 is suitable for combination with highly condensed resins in the formulation of primers with a high solids content. No significant deterioration in reactivity, sandability or chemical resistance is observed compared with formulations based solely on this type of binder. In top coat formulations, Desmophen® PL 817 yields films with good surface hardness and matting. Generally speaking, Desmophen® PL 817 has good compatibility with a large number of physically drying binders (e.g. nitrocellulose). However, compatibility tests should be carried out in each individual case. view less | |
| Desmophen® T 1665 SN/IB | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings a...view more Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings and general industrial coatings with very good weather stability. This product has a density at 20°C (solvent-free) of approx. 1.17g/ml, a hydroxyl content (theoretical) of approx. 1.17%, and an OH equivalent weight (supply form) of approx. 1,000. view less | |
| Desmophen® T 1775 SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for...view more Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for the formulation of can coatings for food packaging. This product has a non-volatile content (2g resin/2ml toluene/1h 125°C/convection oven) of 75 ± 2%, a density at 20°C of approx. 1.08g/ml, and a viscosity at 23°C of 3,700 ± 600 mPa·s. Desmophen T 1775 SN was developed specially as a co-reactant for blocked polyisocyanates in coil coating applications. When combined with preferably Desmodur BL 4265, it yields one-component polyurethane coil coatings with a balanced hardness/flexibility ratio, good resistance to scratching and abrasion as well as excellent QUV/B stability. Dibutyltin dilaurate has proved suitable as the catalyst. The addition should be 0.1–1 %, calculated on the solid binder. The product can be combined with other blocked isocyanates and HMMM-type amino resins. However, such formulations do not generally achieve the same high surface hardness as is achieved with Desmodur BL 4265. view less | |
| Desmophen® VP LS 2249/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an...view more Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an acid value of approx. 2mg KOH/g, a flash point of approx. 130°C, a hydroxyl content of 15.5 ± 1%, and a viscosity at 23°C of 1,900 ± 200 mPa·s. Desmophen® VP LS 2249/1 is used as the hardener component in weather-stable polyurethane systems. The preferred polyol combinations are mixtures with, for example, Desmophen® 1150 or Desmophen® C 1100. Desmophen® VP LS 2249/1 is used in the formulation of hard coatings, sealing compounds and mortars for decorative gravel. The aforementioned Desmodur® grades are among the suitable co-reactants. view less | |
| Desmophen® VP LS 2328 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ±...view more Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ± 0.35%, an acid value of < 0.5mg KOH/g, and a vscosity at 23°C of 800 ± 50 mPa·s. Desmophen® VP LS 2328 is used as the flexibilising component in two-component polyurethane coatings. Preferred polyol combinations are mixtures with e.g. Desmophen® VP LS 2249/1 as the hard component to achieve the desired flexibility. Desmophen® VP LS 2328 is suitable for the formulation of highly flexible polyurethane coatings. Combination with Desmophen® VP LS 2249/1 yields systems of medium flexibility. view less | |
| Desmophen® VP LS 2388 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor wea...view more Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications. This product has a non-volatile content (1g,1h,125°C) of 80 ± 2%, a viscosity at 23°C of 3,000 ± 500 mPa·s, an equivalent weight of approx. 450. Desmophen® VP LS 2388 is used primarily in combination with Desmodur® N 75 and Desmodur® N 3390 in the formulation of fast-drying, high-solids, two-component polyurethane coatings characterised by good lightfastness and weather stability, high film elasticity and good tar resistance. Of particular note is the better QUV performance and tar resistance compared with a Desmodur® N / Desmophen® 670 combination. The film elasticity values are comparable with those yielded by Desmophen® 670. view less | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| GENOMER* 3611 | Rahn AG | GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigme...view more GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigment wetting, high reactivity, good scratch and solvent resistance, high abrasion resistance, and very good lithographic behavior. This product is used in flexo inks and varnishes, as well as in offset inks and varnishes. view less | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...view more GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. view less | Request Sample |
| GENOMER* 6043/M22 | Rahn AG | GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesiv...view more GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| GENOMER* 6050/GP | Rahn AG | GENOMER* 6050/GP is a modified polyester resin in GPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and va...view more GENOMER* 6050/GP is a modified polyester resin in GPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and varnishes; and letterpress inks. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. view less | Request Sample |
| GENOMER* 6050/TM | Rahn AG | GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and v...view more GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and varnishes; and letterpress inks. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. view less | Request Sample |
| Impranil® DL 1380 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special propert...view more Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special properties include high flexibility, good lightfastness, high solid content, soft handle and is suitable for mechanical foaming. This product has a flow time at 23°C (4mmcup) < 90s, a pH values of 6-8, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) 57-61%. view less | |
| Impranil® DL 1537 | Covestro (formerly Bayer MaterialScience) 科思创 | Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include ve...view more Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include very good resistance to hydrolysis, good adhesion, high solid content, good stirring stability, soft handle and is suitable for mechanical foaming. This product has a pH values of 7 ± 1, a flow time at 23°C (4mmcup) of 15-60, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 57-61. view less | |
| Impranil® DLN-SD | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for m...view more Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for mechanical foaming. This product is ideally used for shoe lining materials, outerwear, bags/luggage, and fashion shoe uppers. Impranil® DLN-SD has a pH value of 6.5 ± 1.5, a flow time at 23°C (4mm DIN cup) of ≤ 70s, a density at 23°C of 1.1 g/cm^3, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 40 ± 1%. view less | |
| KEPERADH®-969 | Kito Chem | KEPERADH®-969 is an adhesive, made of a hydroxyl-containing polyester. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resistan...view more KEPERADH®-969 is an adhesive, made of a hydroxyl-containing polyester. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resistance, as well as the fullness and high-temperature resistance of most films. Improving the over all water and salt resistance of paints applied to non-ferrous substrates. view less | |
| KEPERADH®-980 | Kito Chem | KEPERADH®-980 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of ...view more KEPERADH®-980 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of water-based PP substrates and water-based coatings. view less | |
| KEPERADH®-982 | Kito Chem | KEPERADH®-982 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of ...view more KEPERADH®-982 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of water-based PP substrates and water-based coatings. view less | |
| KEPERADH®-992 | Kito Chem | KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...view more KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc. view less | |
| KEPERADH®-993 | Kito Chem | KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...view more KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc.. view less | |
| KEPERADH®-994 | Kito Chem | KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production...view more KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based print, printing ink of the ceramic and glass, ceramic and glass surface and hydrolyzed primers. It can be used in the substrate of the inorganic materials such as glass, ceramics, polymeric materials, paper, etc. view less | |
| KEPERADH®-997 | Kito Chem | KEPERADH®-997 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for us...view more KEPERADH®-997 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of epoxy's, PU and thermoplastic acrylics. It can be used in the substrate of the steel, aluminum alloy, glass, ceramics, polymeric materials, paper, etc. view less | |
| KEPERADH®-998 | Kito Chem | KEPERADH®-998 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for us...view more KEPERADH®-998 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based adhesives. It can be used in the substrate of the steel, aluminum alloy, glass, ceramics, polymeric materials, paper, etc. view less | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...view more L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. view less | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...view more L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. view less | |
| L-2933 | Chan Sieh Enterprises Co, Ltd. | L-2933 is an aliphatic polyester polyol with a solid content ratio of 38.2%. This product provides good heat resistance, is clear and light-stable, and adheres well to many substrates. It can be used as a laminating adhesive. | |
| L-2955 | Chan Sieh Enterprises Co, Ltd. | L-2955 is an aliphatic polyester polyol with a solid content ratio of 38.2%. This product is flexible, and provides humidity resistance with good adhesion. It can be used in adhesive applications. | |
| Nichigo-Polyester HR-0038 | Nippon Gohsei | Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and prime...view more Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and primers, film and label adhesives, and printing paper applications. view less | |
| Nichigo-Polyester LP011 | Nippon Gohsei | Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...view more Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. view less | |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| Nichigo-Polyester LP035 | Nippon Gohsei | Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applicatio...view more Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applications. view less | |
| Nichigo-Polyester TP219 | Nippon Gohsei | Nichigo-Polyester TP219 is a low molecular weight saturated polyester resin that is well suited for use in optical adhesives and general and electronic coating applications. | |
| Nichigo-Polyester TP220 | Nippon Gohsei | Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester a...view more Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP235 | Nippon Gohsei | Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhes...view more Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP236 | Nippon Gohsei | Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC bac...view more Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP249 | Nippon Gohsei | Nichigo-Polyester TP249 is a high molecular weight saturated polyester resin featuring good dispersibility of magnetic elements. This product is well suited for use in plastic and electronic coatings and optical adhesives. | |
| Nichigo-Polyester W-0030 | Nippon Gohsei | Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coati...view more Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coatings and primers, and optical adhesives. view less | |
| Nichigo-Polyester WR-901 | Nippon Gohsei | Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic ...view more Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| Nichigo-Polyester WR-905 | Nippon Gohsei | Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, a...view more Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| Nichigo-Polyester WR-961 | Nippon Gohsei | Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and la...view more Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| POLYESTER ACRYLATE 03-849 | Rahn AG | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...view more POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. view less | Request Sample |
| Priplast™ 1837 | Cargill Industrial Specialties | Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibi...view more Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibility to low-polar components. In PU systems this polyol brings good adhesion to a variety of substrates and is therefore suitable for lightweight, laminate, and construction applications. view less | |
| Priplast™ 3237 | Cargill Industrial Specialties | Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance proper...view more Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance properties like chemical resistance and hydrophobicity. view less | |
| Priplast™ 3294 | Cargill Industrial Specialties | Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with ...view more Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with a molecular weight of 2000. view less | |
| PUD-53 | Macro Polymers Pvt. Ltd. | PUD-53 is a polyester resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood and metal. PUD-53 wets well on low-surface energy substrates, with excellent outdoor and UV durability. It has ...view more PUD-53 is a polyester resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood and metal. PUD-53 wets well on low-surface energy substrates, with excellent outdoor and UV durability. It has high chemical and hydrolysis-resistance. view less | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. |
