| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...Vea Mas 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. Vea Menos | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...Vea Mas ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. Vea Menos | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...Vea Mas ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. Vea Menos | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | Un 25% cera de polietileno oxidada dispersión en TRPGDA. Proporciona resistencia al deslizamientola y la abrasión de transferencia, manteniendo al mismo tiempo brillo y claridad. | |
| COATOSIL DSA 10 | Momentive | Es un polímero reactivo organo-funcional 100% activo, diseñado para mejorar el anclaje de revestimientos momentivos de liberación de silicona, curados térmicamente a películas de poliéster. | |
| COATOSIL DSA 6 | Momentive | La capa dura AS4700 con capa de base SHP470 es una capa dura de silicona resistente a la intemperie, curada térmicamente, resistente a la abrasión, diseñada para proteger sus estratos de policarbonato de color obscuro a negro contra los efectos de compone...Vea Mas La capa dura AS4700 con capa de base SHP470 es una capa dura de silicona resistente a la intemperie, curada térmicamente, resistente a la abrasión, diseñada para proteger sus estratos de policarbonato de color obscuro a negro contra los efectos de componentes ambientales duros y radiación ultravioleta. Con su nueva generación de absorbentes ultravioleta, este sistema de protección de capa dura para policarbonatos es un excelente candidato a considerar para impartir mayor protección de las piezas negras y otras piezas, que otro sistema de revestimientos. Vea Menos | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industr...Vea Mas Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industrial, maderas y de bobinas. Vea Menos | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. FluoroSLIP 605 imparte propiedades superiores de frotación/desgaste, sin deslizamiento. | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies b.v.b.a. | Una dispersión acuosa al 50% de una cera sintética. Utilizado en tejidos, papel, tinta y envases de metal. | |
| Indopol® H-100 | INEOS Oligomers | Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...Vea Mas Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-1200 | INEOS Oligomers | Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...Vea Mas Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-15 | INEOS Oligomers | Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...Vea Mas Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-1500 | INEOS Oligomers | Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...Vea Mas Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-18000 | INEOS Oligomers | Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-dryin...Vea Mas Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-1900 | INEOS Oligomers | Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...Vea Mas Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-2100 | INEOS Oligomers | Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...Vea Mas Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-25 | INEOS Oligomers | Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...Vea Mas Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-300 | INEOS Oligomers | Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...Vea Mas Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-50 | INEOS Oligomers | Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...Vea Mas Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-6000 | INEOS Oligomers | Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying...Vea Mas Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® H-7 | INEOS Oligomers | Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...Vea Mas Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® L-14 | INEOS Oligomers | Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...Vea Mas Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® L-2 | INEOS Oligomers | Indopol® L-2 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...Vea Mas Indopol® L-2 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® L-3 | INEOS Oligomers | Indopol® L-3 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...Vea Mas Indopol® L-3 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® L-6 | INEOS Oligomers | Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...Vea Mas Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Indopol® L-8 | INEOS Oligomers | Indopol® L-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...Vea Mas Indopol® L-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. Vea Menos | |
| Lineplus PF 150-P | Maflon SRL | Lineplus PF 150-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 150-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 150-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 150-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 155-P | Maflon SRL | Lineplus PF 155-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 155-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 155-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 155-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 160-P | Maflon SRL | Lineplus PF 160-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 160-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 160-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 160-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 200 | Maflon SRL | Lineplus PF 200 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 200 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 200 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 200 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 250 | Maflon SRL | Lineplus PF 250 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 250 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 250-F | Maflon SRL | Lineplus PF 250-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 250-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 250-R | Maflon SRL | Lineplus PF 250-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250-R also improves thermal stability and scratch, corrosion, and UV resistance. It c...Vea Mas Lineplus PF 250-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 250-R also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 255 | Maflon SRL | Lineplus PF 255 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 255 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 255 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 255 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 260 | Maflon SRL | Lineplus PF 260 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 260 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 260 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 260 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 300 | Maflon SRL | Lineplus PF 300 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 300 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 300 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 300 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 300-F | Maflon SRL | Lineplus PF 300-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 300-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 300-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 300-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 350 | Maflon SRL | Lineplus PF 350 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 350 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 350 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 350 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 350-R | Maflon SRL | Lineplus PF 350-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 350-R also improves thermal stability and scratch, corrosion, and UV resistance. It c...Vea Mas Lineplus PF 350-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 350-R also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 352-R | Maflon SRL | Lineplus PF 352-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 352-R also improves thermal stability and scratch, corrosion, and UV resistance. It c...Vea Mas Lineplus PF 352-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 352-R also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 450-F | Maflon SRL | Lineplus PF 450-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 450-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 450-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 450-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 600 | Maflon SRL | Lineplus PF 600 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 600 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 600 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 600 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 625-F | Maflon SRL | Lineplus PF 625-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 625-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 625-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 625-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 630-F | Maflon SRL | Lineplus PF 630-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 630-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 630-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 630-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 650-F | Maflon SRL | Lineplus PF 650-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 650-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 650-F is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 650-F also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 700 | Maflon SRL | Lineplus PF 700 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 700 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 700 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 700 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 701 | Maflon SRL | Lineplus PF 701 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 701 also improves thermal stability and scratch, corrosion, and UV resistance. It can be use...Vea Mas Lineplus PF 701 is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 701 also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 750-R | Maflon SRL | Lineplus PF 750-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 750-R also improves thermal stability and scratch, corrosion, and UV resistance. It c...Vea Mas Lineplus PF 750-R is a micronized PTFE additive in the form of an off-white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 750-R also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Lineplus PF 800-P | Maflon SRL | Lineplus PF 800-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 800-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be...Vea Mas Lineplus PF 800-P is a micronized PTFE additive in the form of a white powder. It is used to enhance wear resistance and lubricity of desired materials. Lineplus PF 800-P also improves thermal stability and scratch, corrosion, and UV resistance. It can be used in printing ink, paint, and coating applications. Vea Menos | |
| Michem® Emulsion 05537 | Michelman | Michem® Emulsion 05537 is an emulsion that provides lubricity and scratch and mar resistance in polishes and coatings. | |
| Michem® Emulsion 52137P | Michelman | Michem® Emulsion 52137P as an additive, provides lubricity and is effective as a high temperature mold release for metal dies. | |
| Michem® Lube 260 | Michelman | Michem® Lube 260 is a surfactant free dispersion which improves processing and performance in a number of industries by providing lubricity. | |
| NatureShield® 30 | Michelman | NatureShield® 30 contains 99.5% natural ingredients. This additive imparts good water bead to seed, wood and concrete coatings. | |
| NatureShield® 41 | Michelman | NatureShield® 41 is a natural oil emulsion which imparts water resistance to wood and concrete. It also provides a wet look to stone surfaces. As a penetrating oil emulsion, it highlights the grain of wood substrates. The drying effect of the emulsion pro...Vea Mas NatureShield® 41 is a natural oil emulsion which imparts water resistance to wood and concrete. It also provides a wet look to stone surfaces. As a penetrating oil emulsion, it highlights the grain of wood substrates. The drying effect of the emulsion provides a moderate resistance to scratching. Vea Menos | |
| OMBRELUB CD | Munzing Chemie | OMBRELUB CD is a white, turbid, very finely dispersed calcium stearate dispersion in water. OMBRELUB CD is an excellent friction agent, which improves the glaze during the calendering process. OMBRELUB CD can be added to the coating colour during any stag...Vea Mas OMBRELUB CD is a white, turbid, very finely dispersed calcium stearate dispersion in water. OMBRELUB CD is an excellent friction agent, which improves the glaze during the calendering process. OMBRELUB CD can be added to the coating colour during any stage of the manufacturing process. The product is used in all kinds of pigmented coating colours to improve the print-ability and dimension stability, to avoid dusting and picking during the calendering and printing process, to optimize the run-ability of the calender, to increase the flexibility of the coated top layer and to avoid the brittleness during the manufacturing process. Vea Menos | |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...Vea Mas ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. Vea Menos | Request Sample |
| ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...Vea Mas ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. Vea Menos | Request Sample |
| ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...Vea Mas ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Vea Menos | Request Sample |
| ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Vea Menos | Request Sample |
| ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). Vea Menos | Request Sample |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. Vea Menos | Request Sample |
| ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. Vea Menos | Request Sample |
| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. Vea Menos | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. Vea Menos | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. Vea Menos | Request Sample |
| ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...Vea Mas ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). Vea Menos | Request Sample |
| ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...Vea Mas ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. Vea Menos | Request Sample |
| ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...Vea Mas ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. Vea Menos | Request Sample |
| Polyglykol 1000 | Clariant International Ltd. | Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutic...Vea Mas Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1000 is a white waxy solid at room temperature. Its two hydroxy end groups as well as its ether groups mainly control the physical and chemical properties of Polyglykol 1000. Vea Menos | |
| Polyglykol 10000 FL | Clariant International Ltd. | Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...Vea Mas Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL can be supplied as melt in heated tank trucks, and it has a molecular weight of 9000-11250g/mol. This grade melt also has to be stored under a nitrogen blanket at 60-80°C. Storage time of the melt shall not exceed 2-3 month. This product is also available as Polyglykol 10000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. Vea Menos | |
| Polyglykol 10000 FL Terra | Clariant International Ltd. | Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and...Vea Mas Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. Vea Menos | |
| Polyglykol 10000 P | Clariant International Ltd. | Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 P is a powdered type, and it has a molecular weight of 9000-11250g/mol. Vea Menos | |
| Polyglykol 10000 S | Clariant International Ltd. | Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 S is a flaked type, and it has a molecular weight of 9000-11250g/mol. Vea Menos | |
| POLYGLYKOL 10000 SG VITA | Clariant International Ltd. | POLYGLYKOL 10000 SG VITA is a white solid at room temperature. It is soluble in water and polar organic solvents like acetone or methanol. The product is insoluble in pure hydrocarbons. It shows typical chemical reactions of alcohols/diols and a very low ...Vea Mas POLYGLYKOL 10000 SG VITA is a white solid at room temperature. It is soluble in water and polar organic solvents like acetone or methanol. The product is insoluble in pure hydrocarbons. It shows typical chemical reactions of alcohols/diols and a very low evaporation rate. Vea Menos | |
| Polyglykol 12000 P | Clariant International Ltd. | Polyglykol 12000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 12000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 12000 P is a powdered type available in 25 kg (P) bags or super sacs with up to 500 kg capacity. Vea Menos | |
| Polyglykol 12000 S | Clariant International Ltd. | Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 12000 S is a flaked type. Vea Menos | |
| Polyglykol 1500 FL | Clariant International Ltd. | Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL can be supplied in heated tank trucks. This product is also available as Polyglykol 1500 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. Vea Menos | |
| Polyglykol 1500 FL PU | Clariant International Ltd. | Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharma...Vea Mas Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL PU can be supplied in heated tank trucks. Vea Menos | |
| Polyglykol 1500 FL Terra | Clariant International Ltd. | Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and ...Vea Mas Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL Terra can be supplied in heated tank trucks. Polyglykol 1500 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. Vea Menos | |
| Polyglykol 1500 M70 | Clariant International Ltd. | Polyglykol 1500 M70 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...Vea Mas Polyglykol 1500 M70 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. On request a water based dilution with 70 % Polyglykol 1500 M70 is available. The solidification point of Polyglykol 1500 M 70 is about 8 °C. Vea Menos | |
| Polyglykol 1500 PS | Clariant International Ltd. | Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 PS can be supplied in heated tank trucks. Vea Menos | |
| Polyglykol 1500 S | Clariant International Ltd. | Polyglykol 1500 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...Vea Mas Polyglykol 1500 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 S is a flaked type available in 20 kg bags or super sacs with up to 500 kg capacity. Vea Menos | |
| Polyglykol 2000 FL | Clariant International Ltd. | Polyglykol 2000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 2000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 2000 FL can be supplied in heated tank trucks, and it has a molecular weight of 1800 – 2200g/mol. Vea Menos | |
| Polyglykol 2000 S | Clariant International Ltd. | Polyglykol 2000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...Vea Mas Polyglykol 2000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 2000 S is a flaked type, and it has a molecular weight of 1800 – 2200g/mol. Vea Menos | |
| Polyglykol 300 | Clariant International Ltd. | Polyglykol 300 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutica...Vea Mas Polyglykol 300 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 300 is clear viscous liquid at room temperature. Its two hydroxy end groups as well as its ether groups mainly control the physical and chemical properties of Polyglykol 300. Therefore Polyglykol 300 is soluble in water and polar organic solvents like aceton or methanol. It has a molecular weight of 285 – 315g/mol. Vea Menos | |
| Polyglykol 400 | Clariant International Ltd. | Polyglykol 400 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutica...Vea Mas Polyglykol 400 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 400 displays typical chemical reactions of alcohols/diols, and it has a molecular weight of 380 – 420g/mol. This product is also available as Polyglykol 400 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. Vea Menos | |
| Polyglykol 400 Terra | Clariant International Ltd. | Polyglykol 400 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and moul...Vea Mas Polyglykol 400 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 400 Terra displays typical chemical reactions of alcohols/diols, and it has a molecular weight of 380 – 420g/mol. Polyglykol 400 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. Vea Menos | |
| Polyglykol 4000 FL | Clariant International Ltd. | Polyglykol 4000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 4000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 FL can be supplied in heated tank trucks, and it has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 4000 M 50 | Clariant International Ltd. | Polyglykol 4000 M 50 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmac...Vea Mas Polyglykol 4000 M 50 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 M 50 is a special grade that is supplied as a 50-% solution in water. This product has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 4000 P | Clariant International Ltd. | Polyglykol 4000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...Vea Mas Polyglykol 4000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 P is a powdered type, and it has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 4000 PF | Clariant International Ltd. | Polyglykol 4000 PF is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 4000 PF is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 PF is a powdered type, and it has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 4000 PS | Clariant International Ltd. | Polyglykol 4000 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 4000 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 PS is a powdered type, and it has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 4000 S | Clariant International Ltd. | Polyglykol 4000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...Vea Mas Polyglykol 4000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 4000 S is a flaked type, and it has a molecular weight of 3700 – 4400g/mol. Vea Menos | |
| Polyglykol 600 | Clariant International Ltd. | Polyglykol 600 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutica...Vea Mas Polyglykol 600 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 600 is a viscous liquid at room temperature, and it has a molecular weight of 570 – 630g/mol. This product is also available as Polyglykol 600 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. Vea Menos | |
| Polyglykol 600 PU | Clariant International Ltd. | Polyglykol 600 PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...Vea Mas Polyglykol 600 PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 600 PU is a special grade with low sodium concentrations and/or low water concentrations. This product has a molecular weight of 570 – 630g/mol. Vea Menos | |
| Polyglykol 600 Terra | Clariant International Ltd. | Polyglykol 600 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and moul...Vea Mas Polyglykol 600 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 600 Terra is a viscous liquid at room temperature, and it has a molecular weight of 570 – 630g/mol. Polyglykol 600 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. Vea Menos | |
| Polyglykol 6000 FL | Clariant International Ltd. | Polyglykol 6000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...Vea Mas Polyglykol 6000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 6000 FL is a flaked type, and it has a molecular weight of 5600 – 6600g/mol. Vea Menos | |
| Polyglykol 6000 M 50 | Clariant International Ltd. | Polyglykol 6000 M 50 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmac...Vea Mas Polyglykol 6000 M 50 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 6000 M 50 FL can be supplied in tank trucks or drums. This product is a 50 % solution of PEG 6000 in water. It has a molecular weight of about 6000g/mol. Vea Menos |
