| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIFLEX® 348 es un copolímero en bloque de bisfenol-A-epóxi, líquido amarillento, opaco. Este modificador de la resina reactiva se emplea en imprimadores/rellenos y capas superiores de formulaciones de resina epóxi curadas por calor de dos capas libre de...Vea Mas ALBIFLEX® 348 es un copolímero en bloque de bisfenol-A-epóxi, líquido amarillento, opaco. Este modificador de la resina reactiva se emplea en imprimadores/rellenos y capas superiores de formulaciones de resina epóxi curadas por calor de dos capas libre de solvente. No disminuye la transparencia y presenta excelente flexibilidad. Además, ofrece una adherencia mejorada y gran resistencia al agua. ALBIFLEX® 348 preserva la densidad de la red sin cambiar las propiedades mecánicas y manteniendo una buena compatibilidad con las resinas aromáticas epóxi. Vea Menos | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...Vea Mas ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. Vea Menos | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. | FD-804 es un agente de acoplamiento de aluminato. Se puede utilizar en aditivos y pinturas, lo que puede aumentar la fuerza adhesiva de las capas de base y la estabilidad durante el almacenamiento. Este producto se puede usar como un agente de acoplamient...Vea Mas FD-804 es un agente de acoplamiento de aluminato. Se puede utilizar en aditivos y pinturas, lo que puede aumentar la fuerza adhesiva de las capas de base y la estabilidad durante el almacenamiento. Este producto se puede usar como un agente de acoplamiento en resinas que contienen -OH. Vea Menos | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. | El FD-805 es un acetilacetonato de aluminio iv que se suministra como un polvo blanco. Se puede utilizar en aditivos y pinturas, lo que puede aumentar la fuerza adhesiva de las capas de base y la estabilidad durante el almacenamiento. Este producto se pue...Vea Mas El FD-805 es un acetilacetonato de aluminio iv que se suministra como un polvo blanco. Se puede utilizar en aditivos y pinturas, lo que puede aumentar la fuerza adhesiva de las capas de base y la estabilidad durante el almacenamiento. Este producto se puede usar como un agente de acoplamiento en algunas resinas especiales. Vea Menos | |
| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...Vea Mas ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. Vea Menos | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...Vea Mas Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. Vea Menos | |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...Vea Mas Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. Vea Menos | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...Vea Mas Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. Vea Menos | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...Vea Mas Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. Vea Menos | |
| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 531 | BYK | Emulsión de cera, para mejorar las propiedades de superficie de pinturas y de tintas de impresión industriales, transmitidos por agua. Emulsión no-iónica basada en una cera modificada de polietileno. | |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 593 | BYK | Cera de emulsión para mejorar el anti-deslizamiento en los sistemas de pintura y de tintas de impresión transmitidos por agua. Emulsión no-iónica de una cera modificada de polipropileno. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G es una dispersión acuosa estable al 50% de una mezcla de polietileno (PE) de peso molecular medio y politetrafluoroetileno (PTFE). La mezcla única de PE y PTFE ofrece deslizamiento mejorado y óptima resistencia a la abrasión. Su tamaño de p...Vea Mas AquaFLON® 178G es una dispersión acuosa estable al 50% de una mezcla de polietileno (PE) de peso molecular medio y politetrafluoroetileno (PTFE). La mezcla única de PE y PTFE ofrece deslizamiento mejorado y óptima resistencia a la abrasión. Su tamaño de partícula más grande maximiza el rendimiento y reduce el costo de formulación en comparación con micro dispersiones y emulsiones. AquaFLON® 178G tiene un impacto moderado en el brillo y la claridad, que es lo deseado en sistemas de alto brillo. AquaFLON® 178G también maximiza la carga activa con fácil manejo, excelente estabilidad y dispersión. Vea Menos | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 es una dispersión en agua estable al 50% de politetrafluoroetileno (PTFE). En revestimientos a base de agua y lubricantes, ofrece excelentes propiedades de lubricación y alta resistencia al deslizamiento y la abrasión. Sus partículas pequeñas...Vea Mas AquaFLON® 50 es una dispersión en agua estable al 50% de politetrafluoroetileno (PTFE). En revestimientos a base de agua y lubricantes, ofrece excelentes propiedades de lubricación y alta resistencia al deslizamiento y la abrasión. Sus partículas pequeñas de tamaño uniforme (1 a 3 micrones) solubles en agua facilitan su incorporación en una amplia gama de aplicaciones, incluidos revestimientos para metales, plásticos, vidrio y papel; lubricantes para liberación de moldes y lubricantes para corte y estampado de metal. Vea Menos | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 es una dispersión acuosa de una mezcla de alto peso molecular de cera de polietileno / PTFE. En tintas y revestimientos a base de agua, brinda buena resistencia al roce y el deslizamiento. Este producto presenta partículas más grandes vs. a ...Vea Mas AquaFLON® 797 es una dispersión acuosa de una mezcla de alto peso molecular de cera de polietileno / PTFE. En tintas y revestimientos a base de agua, brinda buena resistencia al roce y el deslizamiento. Este producto presenta partículas más grandes vs. a micro dispersiones y emulsiones, control de deslizamiento y resistencia al roce y moderado impacto sobre el brillo. Es un tensioactivo no iónico para buena dispersión y compatibilidad y posee una excelente estabilidad en almacenamiento sin uso de resinas o aglutinantes. Vea Menos | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| Aquapel (Ink Additive) | Shamrock Technologies b.v.b.a. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies b.v.b.a. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| ARON OXETANE OXT-212 | DKSH | ARON OXETANE OXT-212 is a four-membered cyclic ether compound used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerization and the cured ma...Vea Mas ARON OXETANE OXT-212 is a four-membered cyclic ether compound used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerization and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates. Vea Menos | Request Sample |
| ARON OXETANE OXT-221 | DKSH | ARON OXETANE OXT-221 is a four-membered cyclic ether compound used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerization and the cured ma...Vea Mas ARON OXETANE OXT-221 is a four-membered cyclic ether compound used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerization and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates. Vea Menos | Request Sample |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...Vea Mas AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. Vea Menos | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...Vea Mas AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. Vea Menos | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...Vea Mas AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. Vea Menos | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...Vea Mas ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. Vea Menos | |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...Vea Mas ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. Vea Menos | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...Vea Mas ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution Vea Menos | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...Vea Mas ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. Vea Menos | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...Vea Mas ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution Vea Menos | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...Vea Mas ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution Vea Menos | |
| B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...Vea Mas B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. Vea Menos | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...Vea Mas Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. Vea Menos | |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...Vea Mas Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. Vea Menos | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | BAXXODUR™ EC 201 es un agente endurecedor a base de amina cicloalifática, de viscosidad baja y reactividad moderada. Aplicaciones: adhesivo estructural, pisos, lechada, revestimientos de revestimiento, Etc., en la construcción; también en la laminación c...Vea Mas BAXXODUR™ EC 201 es un agente endurecedor a base de amina cicloalifática, de viscosidad baja y reactividad moderada. Aplicaciones: adhesivo estructural, pisos, lechada, revestimientos de revestimiento, Etc., en la construcción; también en la laminación compuesta, fundición y encapsulación, revestimiento protector de alta resistencia. Vea Menos | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | BAXXODUR™ 301 es un agente endurecedor a base de amina de poliéter con viscosidad baja y vida útil larga. Aplicaciones: adhesivo estructural, construcción, laminación, fundición y encapsulación de compuestos, revestimientos de revestimientos decorativos y...Vea Mas BAXXODUR™ 301 es un agente endurecedor a base de amina de poliéter con viscosidad baja y vida útil larga. Aplicaciones: adhesivo estructural, construcción, laminación, fundición y encapsulación de compuestos, revestimientos de revestimientos decorativos y de protección. Vea Menos | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | BAXXODUR™ 302 es un agente endurecedor a base de amina de poliéter de baja viscosidad y una vida útil larga. Aplicaciones: compuestos, adhesivo estructural, endurecedor de epoxi. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | BAXXODUR™ EC 110 es un agente endurecedor rápido a base de amina alifática de baja viscosidad. Aplicaciones: lechada de epoxi en la construcción, revestimiento de epoxi en la marina y en mantenimiento, fundición y encapsulación, laminación de compuestos,...Vea Mas BAXXODUR™ EC 110 es un agente endurecedor rápido a base de amina alifática de baja viscosidad. Aplicaciones: lechada de epoxi en la construcción, revestimiento de epoxi en la marina y en mantenimiento, fundición y encapsulación, laminación de compuestos, intermedio para la poliamida. Vea Menos | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | BAXXODUR™EC 130 es un agente endurecedor a base de amina de poliéter con viscosidad baja y alta reactividad. Aplicaciones: adhesivo estructural y laminación de compuestos. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, e...Vea Mas BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, epoxi preimpregnado. Vea Menos | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...Vea Mas BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. Vea Menos | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...Vea Mas BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. Vea Menos | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...Vea Mas BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. Vea Menos | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...Vea Mas BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. Vea Menos | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y mono...Vea Mas Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y monocapas de secado rápido con una excelente protección contra la corrosión y muy buenas propiedades antiflacidez. Este producto tiene un comportamiento excelente y un rendimiento muy sólido incluso en superficies con preparación deficiente. Vea Menos | Request Sample |
| BECKOCURE™ EH 2261w/41WA | Allnex | BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...Vea Mas BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. Vea Menos | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...Vea Mas BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...Vea Mas BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...Vea Mas BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA es un endurecedor de amina altamente reactivo para revestimientos epoxi 2K a base de agua en sustratos metálicos. Se utiliza junto con dispersiones de resinas epoxi sólidas como por ejemplo, Beckopox® EP 384W. Los sistemas de reve...Vea Mas Beckopox® EH 2189W/50WA es un endurecedor de amina altamente reactivo para revestimientos epoxi 2K a base de agua en sustratos metálicos. Se utiliza junto con dispersiones de resinas epoxi sólidas como por ejemplo, Beckopox® EP 384W. Los sistemas de revestimiento de sustratos metálicos se pueden formular con una excelente resistencia a la humedad y la pulverización de sal. El uso de 70 a 80% de la cantidad estequiométrica de agente de curado ha dado mejores resultados. Vea Menos | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA es un solvente a base de agua y agente de curado de epoxi poliamida sin ácido acético. Es un endurecedor para revestimientos reducibles con agua en sustratos minerales y metálicos, morteros epoxi hidráulicos (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX® EH 694 es un endurecedor anhídrido para usar con resinas epoxi sólidas, poliésteres OH-funcionales o como un agente de reticulación adicional para sistemas híbridos epoxi/poliéster para la fabricación de revestimientos en polvo. Las formulacione...Vea Mas BECKOPOX® EH 694 es un endurecedor anhídrido para usar con resinas epoxi sólidas, poliésteres OH-funcionales o como un agente de reticulación adicional para sistemas híbridos epoxi/poliéster para la fabricación de revestimientos en polvo. Las formulaciones a base de BECKOPOX® EH 694 presentan resistencia química y al sobrehorneado. Vea Menos | Request Sample |
| BECKOPOX™ VEH 2106w/80WA | Allnex | Aducto alifático de poliamina. Utilizado juntamente con dispersiones sólidas de resina epoxi o resinas líquidas emulsionadas. | Request Sample |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA es un ácido no acético a base de agua que contiene aducto de poliamina alifática que se utiliza junto con dispersiones de resinas epoxi sólidas o resinas líquidas emulsionadas. | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Un endurecedor hidrofóbico de amina especialmente para la formulación de revestimientos para metal, transmitidos por agua, libre de aminas básicas volátiles. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Una aducto alifático de poliamina, acético, libre de ácido, transmitido por agua; es un endurecedor altamente reactivo para revestimientos reducibles al agua en substratos metálicos minerales, donde es importante el curado rápido y la liberación de agua. | Request Sample |
| Benox® A-70 | UNITED INITIATORS GMBH & CO KG | Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...Vea Mas Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. Vea Menos | |
| Benox® A-75 | UNITED INITIATORS GMBH & CO KG | Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...Vea Mas Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. Vea Menos | |
| Benox® A-80 | UNITED INITIATORS GMBH & CO KG | Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...Vea Mas Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. Vea Menos | |
| Benox® B-50 | UNITED INITIATORS GMBH & CO KG | Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...Vea Mas Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. Vea Menos | |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...Vea Mas BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. Vea Menos | |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...Vea Mas BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. Vea Menos | |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...Vea Mas BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. Vea Menos | |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| Benzotriazole | Chemceed | El benzotriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre las aplicaciones adicionales del benzotriazol, se encuentran el uso como agente de pulido para plata en detergent...Vea Mas El benzotriazol es un inhibidor de corrosión para cobre y aleaciones de cobre, y se usa comúnmente en sistemas de enfriamiento de agua. Entre las aplicaciones adicionales del benzotriazol, se encuentran el uso como agente de pulido para plata en detergentes de vajilla, anticongelante para automotores, antióxido para fotografías y se usa como aditivo para lubricantes. Vea Menos | |
| Benzyl Benzoate, USP | Chemceed | El benzoato de bencilo es un plastificante de éster de benzoato de alta solvatación que se puede usar en aplicaciones tales como adhesivos, calafateos y selladores. En tintas y revestimientos, el benzoato de bencilo puede suavizar aglutinantes para mejora...Vea Mas El benzoato de bencilo es un plastificante de éster de benzoato de alta solvatación que se puede usar en aplicaciones tales como adhesivos, calafateos y selladores. En tintas y revestimientos, el benzoato de bencilo puede suavizar aglutinantes para mejorar la flexibilidad. Vea Menos | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amina D700 (solución dimetilaminohidroxi-propano acuosa al 77%) es un aditivo de alcohol amino multifuncional para sistemas de polímeros acuosos. Forma un azeótropo acuoso que reduce el tiempo de secado y maximiza la eliminación de amina. El efec...Vea Mas Bisomer® Amina D700 (solución dimetilaminohidroxi-propano acuosa al 77%) es un aditivo de alcohol amino multifuncional para sistemas de polímeros acuosos. Forma un azeótropo acuoso que reduce el tiempo de secado y maximiza la eliminación de amina. El efecto surfactante de Bisomer® Amina D700 proporciona mayor dispersión de pigmentos, humectación y flujo con beneficios adicionales en sistemas a base de agua. Este producto tiene un contenido de agua de 22 a 24%, una materia activa de 74 a 77,5%, un número de color de 200 Pt/Co máx. y un peso molecular de 103g/mol. Vea Menos | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y q...Vea Mas Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y química de las resinas acrílicas. Este producto también es un diluyente reactivo útil en adhesivos y revestimientos 2K. Vea Menos | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP es un monómero de metacrilato monofuncional hidrófobo con baja temperatura de transición vítrea (Tg). Es excelente paraa proporcionar flexibilidad cuando se utiliza como plastificante polimerizable. Los productos que contienen Bisomer® L...Vea Mas Bisomer® LMA 97SP es un monómero de metacrilato monofuncional hidrófobo con baja temperatura de transición vítrea (Tg). Es excelente paraa proporcionar flexibilidad cuando se utiliza como plastificante polimerizable. Los productos que contienen Bisomer® LMA 97SP presentan una reducida variación en las propiedades como viscosidad, humectación de pigmentos, resistencia química, adherencia, dureza y resistencia. Este producto es una materia prima clave para la síntesis de resinas acrílicas de alta calidad para una amplia gama de aplicaciones, incluidos revestimientos industriales, tintas de impresión y adhesivos sensibles a la presión. Vea Menos | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...Vea Mas BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. Vea Menos | |
| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. |
