| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...Vea Mas DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. Vea Menos | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone...Vea Mas SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. Vea Menos | |
| COATOSIL* 3573 COATINGS ADDITIVE | Momentive | El aditivo para revestimientos CoatOSil* 3573 es un agente altamente compatible para reducir el coeficiente de fricción (COF) de los revestimientos curados con radiación que contienen resinas epoxi acriladas y cicloalifáticas. Contiene 100 % de un polímer...Vea Mas El aditivo para revestimientos CoatOSil* 3573 es un agente altamente compatible para reducir el coeficiente de fricción (COF) de los revestimientos curados con radiación que contienen resinas epoxi acriladas y cicloalifáticas. Contiene 100 % de un polímero de silicona organomodificado. Presenta resistencia a la abrasión y el deterioro en los revestimientos curados por radiación. Vea Menos | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone...Vea Mas Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. Vea Menos | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | Un aditivo antiespumante y desaeración altamente eficaz, a base de silicona para pinturas a base de disolvente y tintas de impresión de composiciones diferentes. . | |
| Surfynol® 104S Surfactant | Evonik Operations GmbH, BL Coating Additives | Un surfactante no iónico que tiene beneficios multifuncionales en sistemas acuosos, incluyendo control de humectación y de espuma. Polvo 46 % activo en Silicona Amorfa. | Request Sample |
| DOWSIL™ 100F Additive | Univar Solutions | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | Request Sample |
| DOWSIL™ 100F Additive | Dow Performance Silicones | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | Un aditivo para pinturas a base de silicona principalmente para sistemas diluibles en agua para eliminar imperfecciones de la superficie y para mejorar las propiedades humectantes. | |
| MODAFLOW® EPSILON | Allnex | Modaflow® Epsilon es un modificador de flujo de acrílico, sin adición de silicona. Mejora el flujo y la nivelación, reduce los defectos y mejora la humectación del sustrato. Este producto también ayuda a mantener o mejorar la adherencia del sustrato, ayud...Vea Mas Modaflow® Epsilon es un modificador de flujo de acrílico, sin adición de silicona. Mejora el flujo y la nivelación, reduce los defectos y mejora la humectación del sustrato. Este producto también ayuda a mantener o mejorar la adherencia del sustrato, ayuda a eliminar la espuma, contribuye a la liberación de aire y facilita la dispersión del pigmento. Vea Menos | Request Sample |
| COATOSIL* 1211 COATINGS ADDITIVE | Momentive | Un candidato excelente a considerar para la protección de las estructuras de concreto de la carreteras incluyendo Poliuretano entes, túneles y los caminos, siendo que impregnación hidrofóbica Poliuretano ede ser alcanzada reduciendo la absorción del agua ...Vea Mas Un candidato excelente a considerar para la protección de las estructuras de concreto de la carreteras incluyendo Poliuretano entes, túneles y los caminos, siendo que impregnación hidrofóbica Poliuretano ede ser alcanzada reduciendo la absorción del agua y de la sal (ion del cloruro) del concreto tratado y mejora la resistencia a la congelación -descongelación. Vea Menos | |
| TEGO® Rad 2100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2100 es un acrilato de silicona líquido transparente; un aditivo de flujo y humectación de sustratos curados por radiación. Es un aditivo de flujo y humectación radicalmente reticulable, altamente compatible, repintable y con propiedades adhesiv...Vea Mas TEGO® Rad 2100 es un acrilato de silicona líquido transparente; un aditivo de flujo y humectación de sustratos curados por radiación. Es un aditivo de flujo y humectación radicalmente reticulable, altamente compatible, repintable y con propiedades adhesivas. Es muy adecuado para promover el flujo y es reimprimible. TEGO® Rad 2100 puede utilizarse tanto en imprimaciones o capas base y en capas de acabado para pinturas y lacas. El agregado de este producto en revestimientos puede realizarse en la forma en que se suministra o prediluido. La predilución con solventes adecuados facilita la dosificación y la incorporación de TEGO® Rad 2100. Vea Menos | Request Sample |
| SiSiB® PC5433 | SiSiB SILICONES | SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone...Vea Mas SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. Vea Menos | |
| SILCOLEASE PSA PRIMER 409 | Elkem Silicones | SILCOLEASE PSA PRIM 409 cures by a polycondensation reaction with an organometallic compound and a crosslinker to obtain an elastomeric type coating. In certain applications, the anchorage of the adhesive SILCOLEASE PSA 400 to the backing film may be insufficient and the coating of the SILCOLEASE PSA PRIM 409 prior to the adhesive coating may be required. SILCOLEASE PSA PRIM 409 is a silicone...Vea Mas SILCOLEASE PSA PRIM 409 cures by a polycondensation reaction with an organometallic compound and a crosslinker to obtain an elastomeric type coating. In certain applications, the anchorage of the adhesive SILCOLEASE PSA 400 to the backing film may be insufficient and the coating of the SILCOLEASE PSA PRIM 409 prior to the adhesive coating may be required. SILCOLEASE PSA PRIM 409 is a silicone polymer diluted in an aromatic solvent used as an adhesion promoter. Vea Menos | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...Vea Mas BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. Vea Menos | |
| TROYSOL™ MS2 | Arxada – Troy Corporation | Troysol™ MS-2 is supplied as a low viscosity liquid which mixes readily into both aqueous and non-aqueous formulations to improve the following properties: Increased surface slip, improved mar resistance, increased blocking resistance, surface leveling an...Vea Mas Troysol™ MS-2 is supplied as a low viscosity liquid which mixes readily into both aqueous and non-aqueous formulations to improve the following properties: Increased surface slip, improved mar resistance, increased blocking resistance, surface leveling and increased abrasion resistance. Vea Menos | Request Sample |
| VINAVIL® 2841 | VINAVIL Americas Corp. | VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for films, double-sided tapes, foams, textiles and labels. It can also be used in floor adhesives and in textile screen printing applications. This product coats well on silicone...Vea Mas VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for films, double-sided tapes, foams, textiles and labels. It can also be used in floor adhesives and in textile screen printing applications. This product coats well on silicone-coated release paper. Vea Menos | |
| Epoxies® 20-1700 | Epoxies, Etc. | Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protec...Vea Mas Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1700 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. Vea Menos | |
| Epoxies® 20-1705 | Epoxies, Etc. | Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide prot...Vea Mas Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1705 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. Vea Menos | |
| Epoxies® 20-1710 | Epoxies, Etc. | Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...Vea Mas Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1710 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. Vea Menos | |
| Epoxies® 20-1715 | Epoxies, Etc. | Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...Vea Mas Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1715 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. Vea Menos | |
| FOAMSTAR® SI 2240 | BASF Formulation Additives | FOAMSTAR® SI 2240 is a silicone based defoamer compound with a broad compatibility in various binder systems, spontaneous defoaming effect and excellent long term efficiency. It is well suited for the production of pigment concentrates due to the fact tha...Vea Mas FOAMSTAR® SI 2240 is a silicone based defoamer compound with a broad compatibility in various binder systems, spontaneous defoaming effect and excellent long term efficiency. It is well suited for the production of pigment concentrates due to the fact that it shows excellent stability under high shear conditions. However, it also shows very good efficiency in the let-down stage. FOAMSTAR® SI 2240 has an extended food contact compliance and global country registrations. Vea Menos | |
| BYK®-1794 | BYK | BYK-1794 es un antiespumante polimérico, sin silicona y libre de emisiones para sistemas UV, sin solventes y a base de solventes. El aditivo es especialmente recomendado para sistemas sin solventes y con alto contenido en sólidos, basados en sistemas epóx...Vea Mas BYK-1794 es un antiespumante polimérico, sin silicona y libre de emisiones para sistemas UV, sin solventes y a base de solventes. El aditivo es especialmente recomendado para sistemas sin solventes y con alto contenido en sólidos, basados en sistemas epóxicos, PUR, poliaspárticos y UV. Es apropiado para sistemas pigmentados y no pigmentados, no tiene efecto sobre propiedades de superficie o transparencia y es efectivo durante la producción y todo su proceso. El aditivo consiste en un 100% de sólidos y es libre de solventes. BYK-1794 es utilizado en sistemas de capa gruesa, tales como revestimientos para pisos. BYK-1794 ofrece excelente compatibilidad con revestimientos sin solventes para tanques de lastre, interiores de tanques, etc. También es muy efectivo en sistemas de éster ácido para revestimientos de tuberías y material de concreto así como otros sistemas de revestimientos sin solventes para un alto grado de protección corrosiva. En sistemas de revestimientos de bobinas a base de solventes (por ejemplo, sistemas PUR o de melamina de poliéster), BYK-1794 es muy compatible y produce buenos y espontáneos efectos antiespumantes. Se pueden lograr resultados excelentes en sistemas UV para revestimientos de mobiliarios y madera. Vea Menos | Request Sample |
| FOAMSTAR® ST 2434 | BASF Formulation Additives | FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), ...Vea Mas FOAMSTAR® ST 2434 is effective in high gloss paints and coatings based on acrylic, styrene acrylic and vinyl acrylic latex. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® ST 2434 defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. FOAMSTAR® ST 2434 utilizes the FOAMSTAR® Molecule compounded with polysiloxanes in a mineral oil-free system. Vea Menos | |
| REAXIS® C225 | Reaxis Inc. | REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This product is used at concentrations ranging from 0.01 - 1.0 wt%. REAXIS® C225 is well suited for use as a catalysis of isocyanate/alcohol reactions, esterification and transesterification reactions, silicone...Vea Mas REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This product is used at concentrations ranging from 0.01 - 1.0 wt%. REAXIS® C225 is well suited for use as a catalysis of isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and saline modified polyethylenes. Vea Menos | |
| Solvent Dispersion Yellow TRAFe® SB13 | Shaoxing Allway Nano Technology Co., Ltd. (Chemsfield) | TRAFe® SB13 is a solvent yellow dispersion for all kinds of industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short o...Vea Mas TRAFe® SB13 is a solvent yellow dispersion for all kinds of industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluoro and vinyl ester resins. Recommend for all kinds of industrial paints,wood coatings and plastic cement paints. Suggested for industrial paints, wood coatings, auto decorative paints, plastic cement paints and metallic packing ink. Vea Menos | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | Un aditivo de silicona de alta molecularidad para mejorar las propiedades superficiales de pinturas al agua diluibles y tintas de impresión. | |
| EBECRYL® 1360 | Allnex | EBECRYL® 1360 es un material de hexa acrilato de silicona que contribuye a la humectación de sustratos y propiedades de flujo cuando se usa como aditivo en formulaciones curadas por luz UV o EB. Las películas curadas que contienen EBECRYL® 1360 presentan ...Vea Mas EBECRYL® 1360 es un material de hexa acrilato de silicona que contribuye a la humectación de sustratos y propiedades de flujo cuando se usa como aditivo en formulaciones curadas por luz UV o EB. Las películas curadas que contienen EBECRYL® 1360 presentan una superficie lisa, no pegajosa, con buena resistencia al bloqueo. Se recomienda para usar en: barnices de sobreimpresión, revestimientos transparentes de papel, plástico y metal, revestimientos de liberación y revestimientos curados por EB. Vea Menos | Request Sample |
| EFKA® PB 2021 | BASF Formulation Additives | EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product ...Vea Mas EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product helps to prevent surface irregularities to give the smoothest possible surface. EFKA® PB 2021 is especially suited for solvent-based coatings if foam formation is a problem when applied by spraying or curtain coating. Vea Menos | |
| BYK®-322 | BYK | Aditivo de superficie de silicón con reducción ligera de tensión de superficie. Polimetilalquilsiloxano aralquilo modificado. | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superfic...Vea Mas Dynoadd® F-708 es un aditivo polimérico no siliconado para controlar la espuma. Es efectivo para prevenir la formación de espuma y es especialmente eficaz en la liberación de aire, reduciendo las burbujas. Dynoadd® F-708 controla la tensión de la superficie en sistemas con base solvente y no solvente. En pequeñas cantidades puede contribuir también a mejorar el fluido y a reducir imperfecciones de la superficie, como cráteres y piel de naranja. Dynoadd® F-708 tiene buena compatibilidad con diversas dispersiones de cera y ofrece un buen desempeño, aún en revestimientos muy encerados. Dynoadd® F-708 puede utilizarse con aditivos fluidos Dynoadd®, en particular Dynoadd® F-101. Dynoadd® F-708 se aplica en revestimientos de carrete, revestimientos PVdF, la industria en general y en revestimientos de embalajes. Se recomienda una dosis inicial de prueba de 0,05%. El aditivo es compatible con la mayoría de los sistemas de revestimiento que se curan por radiación con base solvente o no solvente, independientemente de la composición química de la laca. Se pude utilizar en todas las capas de un sistema multicapa. Vea Menos | Request Sample |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | Un aditivo especial para mejorar la humectación del sustrato de sistemas acuosos. | |
| SiSiB® PC5420 | SiSiB SILICONES | SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone...Vea Mas SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. Vea Menos | |
| SYLOSIV® A 3 | GRACE | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone...Vea Mas SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. Vea Menos | |
| SYLOSIV® A 3 | Univar Solutions | SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone...Vea Mas SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. Vea Menos | Request Sample |
| BYK®-037 | BYK | Antiespumante de aceite mineral para pinturas de emulsión, emulsiones industriales, yesos de emulsión y adhesivos de emulsión; para des-airar durante la producción y la aplicación. | Request Sample |
| BYK®-P 104 S | BYK | Aditivo humectante y de dispersión para sistemas transmitidos por solvente. Solución de un polímero ácido policarboxílico, no saturado, de un peso molecular mas bajo y de un copolímero de polisiolaxano. | Request Sample |
| XOANONS® WE-D5527 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5527 is a double-hydroxyl terminated polyether modified polysiloxane. Replace part polyether polyols to copolymerization with isocyanate when synthetic sizing agent. Improve softness, lubricating property and hydrophobicity of organic resin from structure. Improve hydrolytic stability of PUR. The coating effect is lasting. No migration problem of blending modification silicone...Vea Mas XOANONS® WE-D5527 is a double-hydroxyl terminated polyether modified polysiloxane. Replace part polyether polyols to copolymerization with isocyanate when synthetic sizing agent. Improve softness, lubricating property and hydrophobicity of organic resin from structure. Improve hydrolytic stability of PUR. The coating effect is lasting. No migration problem of blending modification silicone. Higher solubility than normal silicon, not only can dissolve in water, alcohol system, but also can be used for oil system, even 10% addition. Improve slip when add to synthetic fiber processing. Vea Menos | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone...Vea Mas SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. Vea Menos | |
| AFCONA - 2028 | AFCONA Additives Sdn Bhd | AFCONA – 2028 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This product functions as a moderate and easy-to-use defoamer preventing foam and blisters during the manufacture and ...Vea Mas AFCONA – 2028 is a silicone-containing defoaming polymer in a xylene, methoxy propyl acetate, butyl acetate, and ethyl acetate solution. This product functions as a moderate and easy-to-use defoamer preventing foam and blisters during the manufacture and application of solvent-based wood finishes and curtain coatings. AFCONA – 2028 finds application in polyurethane coatings for wood, plastic, and car refinishes, unsaturated polyester systems, acid curing coatings for wood, and NC lacquers for wood and general industrial coatings. Vea Menos | |
| BYK®-019 | BYK | Antiespumantes de silicón para sistemas acuosos. Solución de un polidimetilosiloxano, poliéter modificado . | Request Sample |
| BYK®-025 | BYK | Antiespumante de silicón para sistemas acuosos. Solución de polisiolaxanos destructores de espuma | Request Sample |
| BYK®-044 | BYK | Antiespumante de silicón para sistemas acuosos. Emulsión de partículas y de polisiolaxanos hidrofóbicos. | Request Sample |
| BYK®-085 | BYK | Antiespumante de silicón y aditivo para superficies, para sistemas transmitidos por solvente. Polimetilalquilsiloxano. | Request Sample |
| BYK®-018 | BYK | Antiespumantes de silicón para sistemas acuosos. Mezcla de sólidos hidrofóbicos y de polisiolaxanos destructores de espuma. | Request Sample |
| BYK®-094 | BYK | Antiespumante de silicón para sistemas acuosos. Compuesto de polisiolaxanos destructores de espuma y sólidos hidrofóbicos. | Request Sample |
| BYK®-141 | BYK | Antiespumante de silicón para sistemas transmitidos por solvente. Solución de polímeros y polisiolaxanos, destructores de espuma | Request Sample |
| ADDITOL® XL 482 | Allnex | ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains no silicone...Vea Mas ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains no silicone ingredients. Vea Menos | Request Sample |
| REAXIS® C129LC | Reaxis Inc. | REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act ...Vea Mas REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act as a catalysis of lactone polymerization to form biodegradable polymers. REAXIS® C129LC can be utilized neat or as a mixture in alcohols. This product is typically used at concentrations ranging from 0.01 - 0.20 wt% at 80 - 240 °C. Vea Menos | |
| BYK®-021 | BYK | Antiespumantes de silicón para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol. | Request Sample |
| BYK®-022 | BYK | Antiespumantes de silicón para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol. | Request Sample |
| BYK®-023 | BYK | Antiespumantes de silicón para sistemas acuosos. Emulsión de polisiolaxanos destructores de espuma, de sólidos hidrofóbicos y de emulsores. | Request Sample |
| BYK®-024 | BYK | Antiespumante de silicón para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol. | Request Sample |
| BYK®-028 | BYK | Antiespumantes de silicón para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol. | Request Sample |
| BYK®-070 | BYK | Antiespumante polimérico de silicón para revestimientos solvente-transmitidos. Solución de polímeros y polisiolaxanos destructores de espuma. | Request Sample |
| BYK®-088 | BYK | Antiespumante polimérico de silicón para revestimientos solvente-transmitidos. Solución de polímeros y de polisiolaxanos destructores de espuma. | Request Sample |
| BYK®-1610 | BYK | Antiespumante de silicón para sistemas acuosos. Emulsión de sólidos hidrofóbicos, emulsores y polisiolaxanos destructores de espuma. | Request Sample |
| BYK®-1615 | BYK | Antiespumante de silicón para sistemas acuosos. Emulsión de sólidos hidrofóbicos, emulsores y de polisiolaxanos destructores de espuma. | Request Sample |
| Polyester Modified Silicon Resin SM1072A | Jiangsu Sanmu Group Corporation | SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and...Vea Mas SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and yellowing resistance. SM1072A can be widely used in heat resisting coatings, used as a basic resin for non-stick coatings and special coatings for frying pans, electric cookers, ovens, stoves, toasters, electric irons, kitchen ventilators, and gas stoves. Vea Menos | |
| LA-9331 | US Polymers - Accurez LLC | LA-9331 is an aliphatic silicone modified hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. In addition to the excellent physical and chemical properties that are characteris...Vea Mas LA-9331 is an aliphatic silicone modified hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. In addition to the excellent physical and chemical properties that are characteristic of other high-performance polyesters, LA-9331 produces coatings with excellent long-term weathering comparable to that of acrylic polyols. End-use applications for 9331 include aerospace, automotive refinish, fleet OEM, marine, and numerous interior and exterior industrial maintenance coating systems. Vea Menos | Request Sample |
| EFKA® PB 2018 AN | BASF Formulation Additives | EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 201...Vea Mas EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings. Vea Menos | |
| EDAPLAN® LA 403 | Munzing Chemie | EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free,...Vea Mas EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free, water resistance is not affected, prevents surface defects, and reduction of foam tendency. Main application areas include chemical curing systems, e.g. wood coatings, automotive, OEM and repair coatings, industrial coatings, 2K-systems, and printing inks and overprint varnishes. Vea Menos | |
| HDK® T30 | Wacker Chemical Corporation | Una silicona amorfa sintética, hidrofílica, producida vía la hidrólisis por fuego. | Request Sample |
| BYK®-093 | BYK | Antiespumante de silicón de alta persistencia para sistemas acuosos. Mezcla de polisiolaxanos destructores de espuma y de sólidos hidrofóbicos en poliglicol. | Request Sample |
| BYK®-349 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Siloxano poliéter-modificado. | Request Sample |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 es un aditivo para liberar aire, sin silicona, que puede utilizarse para prevenir la formación de espuma en sistemas de revestimiento. Este producto rompe rápidamente las burbujas en películas húmedas aplicadas y evita que el aire quede atra...Vea Mas DAPRO® DF 880 es un aditivo para liberar aire, sin silicona, que puede utilizarse para prevenir la formación de espuma en sistemas de revestimiento. Este producto rompe rápidamente las burbujas en películas húmedas aplicadas y evita que el aire quede atrapado durante etapas de procesamiento como la molienda, la mezcla o el bombeo. Vea Menos | Request Sample |
| Drewplus™ T-4202 Foam Control Agent | Ashland | Drewplus® T-4202 es un agente de control de espuma para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de impresión f...Vea Mas Drewplus® T-4202 es un agente de control de espuma para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de impresión flexográficas. Vea Menos | |
| Drewplus™ T-4303 | Ashland | Drewplus® T-4303 es un agente de control de espuma 100% activo para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de...Vea Mas Drewplus® T-4303 es un agente de control de espuma 100% activo para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de impresión flexográficas. Drewplus® T-4303 es una formulación patentada no iónica de derivados de sílice, aceites minerales y ésteres. Vea Menos | |
| TROYKYD® D336 | Arxada – Troy Corporation | TROYKYD® D336 provides fast knock-down of standing foam in a variety of industrial applications. Typical applications include: hard-surface cleaners mild-alkaline to mild-acid metal cleaners, surfactant production and drum-filling, paperboard laminating, ...Vea Mas TROYKYD® D336 provides fast knock-down of standing foam in a variety of industrial applications. Typical applications include: hard-surface cleaners mild-alkaline to mild-acid metal cleaners, surfactant production and drum-filling, paperboard laminating, starch, glue, and resin cooking, and soluble Oil lubricants and coolants Vea Menos | Request Sample |
| FOAMASTER® MO 2175 | BASF Formulation Additives | FOAMASTER® MO 2175 is a non-separating defoamer for flat to semi-gloss coatings that offers good persistency and knock down. It is a cost-effective alternative to silica-based defoamers. This opaque off-white liquid is a general purpose defoamer for flat ...Vea Mas FOAMASTER® MO 2175 is a non-separating defoamer for flat to semi-gloss coatings that offers good persistency and knock down. It is a cost-effective alternative to silica-based defoamers. This opaque off-white liquid is a general purpose defoamer for flat to semi-gloss architectural coating. Vea Menos | |
| DAPRO® DF 7007 | Elementis | DAPRO® DF 7007 es un catalizador quelante que reemplaza a los secadores a base de cobalto en revestimientos acuosos. | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente pa...Vea Mas Dynoadd® F-713 elimina el aire atrapado, las perforaciones y la espuma de la superficie en fórmulas 100% libres o con bajo porcentaje de COV. Impide que se forme espuma durante la fabricación y la aplicación. Dynoadd® F-713 esta indicado especialmente para películas espesas como revestimientos para pisos, piezas de fundición y moldería basadas en epóxi 2K, PU y PE no saturado. Dynoadd® F-713 puede reducir la transparencia de la película. Dynoadd® F-713 se aplica en fórmulas de epóxi 2K, PE no saturado y PU 1 y 2K. Vea Menos | Request Sample |
| EFKA® PB 2020 | BASF Formulation Additives | EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result ...Vea Mas EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. Vea Menos | |
| EFKA® PB 2720 | BASF Formulation Additives | EFKA® PB 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| FOAMASTER® MO 2111 NC | BASF Formulation Additives | FOAMASTER® MO 2111 NC is a defoamer specifically designed for water based paints and coatings, water based printing inks as well as for latex adhesive systems. A defoamer level of 0.5%, based on total ink or adhesive, is a good starting point for determin...Vea Mas FOAMASTER® MO 2111 NC is a defoamer specifically designed for water based paints and coatings, water based printing inks as well as for latex adhesive systems. A defoamer level of 0.5%, based on total ink or adhesive, is a good starting point for determining the optimum use level. Vea Menos | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...Vea Mas Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. Vea Menos | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....Vea Mas Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. Vea Menos | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...Vea Mas Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Vea Menos | Request Sample |
| SYLOSIV® K 300 | GRACE | SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone...Vea Mas SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. Vea Menos | |
| Siltech® C-42 | Siltech Corp. | Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. ...Vea Mas Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy resins. This product is 100% active and is soluble in aliphatic and aromatic solvents. Vea Menos | |
| Siltech® C-608 | Siltech Corp. | Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary f...Vea Mas Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. Vea Menos | |
| Surfadol® 541E Surfactant | ACME | Surfadol 541E es una molécula de diol acetilénico no iónica, que tiene un medio hidrófilo central bloqueado por dos extremos hidrófobos. Este producto es un líquido 50% activo en etilenglicol. | |
| Surfadol® 541H Surfactant | ACME | Surfadol 541H es un surfactante de diol acetilénico que tiene beneficios multifuncionales, incluido el control de la humedad y la espuma en sistemas acuosos. Este producto es un líquido 75% activo en etilenglicol. | |
| Surfadol® 541PA Surfactant | ACME | Surfadol 541PA es un surfactante de diol acetilénico que tiene beneficios multifuncionales, incluido el control de la humedad y la espuma en sistemas acuosos, que es un líquido 50% activo en alcohol isopropílico. | |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone...Vea Mas SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. Vea Menos | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone...Vea Mas SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. Vea Menos | |
| WorléeAdd 352 | Worlée-Chemie G.m.b.H. | Un aditivo de silicona de alta molecularidad para la mejora de las propiedades superficiales de lacas diluibles agua y tintas de impresión. | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | Un aditivo para la pintura, lacas y acabado de cuero a base de silicona. Mejora la resistencia al rayado y al deslizamiento, así como la reducción de la cáscara de naranja. | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...Vea Mas SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. Vea Menos | |
| WorléeSol SE 420 W | Worlée-Chemie G.m.b.H. | Una emulsión alquídica co-disolvente libre, silicona modificada ,de aceite mediano ,diseñado especialmente para la fabricación de capas superiores de alto brillo, diluibles en agua, de secado al aire. | |
| Tween™ 40 | Croda Coatings & Polymers | Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...Vea Mas Tween™ 40 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. Vea Menos | |
| Tween™ 21 | Croda Coatings & Polymers | Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent sta...Vea Mas Tween™ 21 is versatile for multiple applications. It can be used as a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It is also a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also used as a formulation enhancer for a broad selection of specialty surfactants (non APE, non/low VOC, HAPS free) to solve challenges in aqueous and non-aqueous formulations. Vea Menos | |
| LOPON® E 13 | ICL Phosphate Specialty | LOPON® E 13 is a defoamer for water based emulsion paints with focus on architectural paints and plasters. The defoamer itself is based on vegetable oil and is free of mineral oil and silicone. LOPON® E13 contains an optimized emulsifier system, which all...Vea Mas LOPON® E 13 is a defoamer for water based emulsion paints with focus on architectural paints and plasters. The defoamer itself is based on vegetable oil and is free of mineral oil and silicone. LOPON® E13 contains an optimized emulsifier system, which allows a very fast and effective miscibility with the water based system. The compatibility with different types of emulsion allows a wide range of formulation possibilities. Concerning the safety aspects, LOPON® E 13 conforms to BfR XIV and FDA. Vea Menos | Request Sample |
| Epoxies® 20-1640 | Epoxies, Etc. | Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive comp...Vea Mas Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive components. Due to its low stress during and after cure, this material will not crush or damage delicate components. 20-1640 is formulated without solvents or other toxic materials. As a result, no by-products released during cure and safe to handle. Vea Menos | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone...Vea Mas Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. Vea Menos | |
| SILCOLEASE XL 326 | Elkem Silicones | SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to sign...Vea Mas SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to significantly reduce platinum catalyst use without having to increase process temperatures or reduce line speeds. SILCOLEASE XL 326 and SILCOLEASE XL 328 contain both copolymer and homopolymer methyl hydrogen components and provide efficient cure with good adhesion to a variety of liner substrates along with stable release. Vea Menos | |
| SILCOLEASE XL 328 | Elkem Silicones | SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to si...Vea Mas SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to significantly reduce platinum catalyst use without having to increase process temperatures or reduce line speeds. SILCOLEASE XL 326 and SILCOLEASE XL 328 contain both copolymer and homopolymer methyl hydrogen components and provide efficient cure with good adhesion to a variety of liner substrates along with stable release. Vea Menos | |
| LA-9339 | US Polymers - Accurez LLC | LA-9339 is an aliphatic silicone modified hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a zero VOC solvent system. In addition to the excellent physical and ch...Vea Mas LA-9339 is an aliphatic silicone modified hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a zero VOC solvent system. In addition to the excellent physical and chemical properties that are characteristic of other high performance polyesters, LA-9339 produces coatings with excellent long-term weathering comparable to that of acrylic polyols. End-use applications for 9339 include aerospace, automotive refinish, fleet OEM, marine, and numerous interior and exterior industrial maintenance coating systems. Vea Menos | Request Sample |
| Solvent Dispersion Red TRAFe® SB177 | Shaoxing Allway Nano Technology Co., Ltd. (Chemsfield) | TRAFe® SB177 is a solvent red dispersion for all kinds of metallic automotive paints and automotive refinish paints. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone...Vea Mas TRAFe® SB177 is a solvent red dispersion for all kinds of metallic automotive paints and automotive refinish paints. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluoro and vinyl ester resins. Recommended for all kinds of metallic automotive paints, automotive refinish paints, industrial paints and plastic cement paints. Suggested for automotive paints, automotive refinish paints, industrial paints, auto decorative paints, plastic cement paints and metallic packing ink. Vea Menos | |
| Solvent Dispersion Yellow TRAFe® SB180 | Shaoxing Allway Nano Technology Co., Ltd. (Chemsfield) | TRAFe® SB180 is a solvent yellow dispersion for all kinds of metallic automotive paints and automotive refinish paints. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone...Vea Mas TRAFe® SB180 is a solvent yellow dispersion for all kinds of metallic automotive paints and automotive refinish paints. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluoro and vinyl ester resins. Recommended for all kinds of metallic automotive paints, automotive refinish paints, industrial paints and plastic cement paints. Suggested for automotive paints, automotive refinish paints, industrial paints, auto decorative paints, plastic cement paints and metallic packing ink. Vea Menos | |
| SiSiB® PC5423 | SiSiB SILICONES | SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hydrolysis; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinker component in cold curing silicone...Vea Mas SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hydrolysis; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinker component in cold curing silicone rubber systems; as a hardening component in dentistry for impression materials and as binder for embedding material; or as a binder in precision foundry industry. Vea Menos |
