| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W210是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度，增加各种涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-12微米，与其他3M白色陶瓷微球相比具有最小的消光度，可理想地应用于浅色薄膜涂料和粉末涂料 | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W410是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度，增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-24微米，具有中等消光度，可理想地应用于耐擦亮的建筑漆，大多数浅色工业和维护产品 | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W610是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度和增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-40微米，是3M白色产品中消光度最大的。是厚度超过2密耳的维护漆、低光泽涂料、胶粘剂和装饰地板漆的出色选择 | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...展开 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K1的密度为0.125g/cc，均衡耐压强度为250psi | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....展开 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K20的密度为0.2g/cc，均衡耐压强度为500psi | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....展开 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K37的密度为0.37g/cc，均衡耐压强度为3000psi | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K46的密度为0.46g/cc，均衡耐压强度为6000psi | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S15的密度为0.15g/cc，均衡耐压强度为300psi | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S22的密度为0.22g/cc，均衡耐压强度为400psi | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S32的密度为0.22g/cc，均衡耐压强度为400psi | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...展开 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...展开 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S38HS的密度为0.38g/cc，均衡耐压强度为5500psi | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...展开 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S60的密度为0.6g/cc，均衡耐压强度为10000psi | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 加工添加剂，用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂，应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量，提高反射率，减少收缩，改善表面外观，降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S60HS的密度为0.6g/cc，均衡耐压强度为18000psi | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...展开 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起 | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起 | |
| Accowear | Accoat A/S | Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...展开 Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. 收起 | |
| Acti-Gel® 208 | Active Minerals | Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and hom...展开 Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and homogeneously disperses other particles in liquid systems creating a very stable mixture yet enables higher loadings of solids without increasing viscosity. Acti-Gel 208 additive can be a simple fix for syneresis, pigment float & flooding and sedimentation problems in a wide range of water-based coatings. Its low dosage, and extremely low residue makes it a quick “post-add” solution for stability problems in existing coating formulas without changing its rheology, paint formula or packaging label. 收起 | Request Sample |
| Acti-Min® PG | Active Minerals | Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our h...展开 Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our highest brightness product, Acti-Min® PG product can be a lbs-for-lbs direct replacement for higher cost water-washed kaolin products in coatings and similar applications. Its very fine and narrow particle size distribution in the 0.25 to 0.4 micron range has shown to be more effective at TiO2 extension in latex paint than standard water-washed kaolin grades. 收起 | Request Sample |
| ADDAPT® SilStab HL+ | ADDAPT Chemicals BV | ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preserva...展开 ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preservatives. 收起 | |
| ADDAPT® SilStab L 100 | ADDAPT Chemicals BV | ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion proper...展开 ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion properties when applied to ferrous surfaces. The high stability of ADDAPT® SilStab L 100 allows it to be added to coatings without causing coagulation, and no additional stabilizing additives are necessary. 收起 | |
| ADDAPT® SilStab L 50 | ADDAPT Chemicals BV | ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...展开 ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. 收起 | |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM是一种激活的SILFIT Z 91，对氨基官能团硅烷进行了表面改性。作为一种功能填料，既可以单独使用，也可结合其它填料或消光剂使用。结合产生硫磺或硫磺的基团，氨基或双酚交联体系可使极性弹性体取得最佳效果。可用于需要高抗张强度和高模量以及非常低的拉伸和压缩形变的场合，兼顾出色的加工和挤出性能 | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...展开 AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). 收起 | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...展开 AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). 收起 | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM是一种激活的SILFIT Z 91。作为一种功能填料，既可以单独使用，也可结合其它填料或消光剂使用。用于通过自由基引发反应进行聚合的基料体系可获得最佳效果。 | |
| AKTISIL AM | Hoffmann Mineral | 用氨基硅烷进行表面处理的活化SILLITIN Z 86。作为功能性填充料，可单独或与流变助剂和/或消光剂共同使用。 | |
| AKTISIL MAM | Hoffmann Mineral | 用甲基丙烯酸硅烷进行表面处理的活化SILLITIN Z 88。作为功能性填充料，可单独或与流变助剂和/或消光剂共同使用 。 | |
| AKTISIL MAM-R | Hoffmann Mineral | 用甲基丙烯酸硅烷进行表面处理的活化SILLITIN Z 85。作为功能性填充料，可单独或与流变助剂和/或消光剂共同使用 。 | |
| AKTISIL PF 777 | Hoffmann Mineral | 活性SILLITIN Z 86，采用烷基硅烷对表面进行改性制得。反应过程中分离出来的副产品大部分都通过生产工艺被祛除，这些副产品使硅烷牢固地吸附在填料的表面。这一点有助于最大限度地减少不需要的副作用，因为它们可能与原位混合(硅烷直接添加到混合物中)发生冲突。 | |
| AKTISIL VM 56 | Hoffmann Mineral | 用乙烯基硅烷进行表面处理的活化SILLITIN Z 86。作为功能性填充料，可单独或与流变助剂和/或消光剂共同使用 。 | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTIFIT VM 56/89是一种激活的SILFIT Z 89，对3-乙烯三乙氧基硅烷进行了表面改性。作为一种功能填料，既可以单独使用，也可结合其它填料或消光剂使用。 | |
| ALBACAR® 5970 | Specialty Minerals | ALBACAR® 5970 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 50 and a specific gravity of 2.7. ALBACAR® 5970 is used as a filler in paints, adhesives, sealants, caulks, and plastics. | |
| ALBACAR® 8101 | Specialty Minerals | ALBACAR® 8101 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 36 and a specific gravity of 2.7. ALBACAR® 8101 is used as a filler in paints, adhesives, sealants, caulks, and plastics. | |
| ALBAFIL® | Specialty Minerals | ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatin...展开 ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatings. 收起 | |
| Almatis BayGranite®17 ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is pr...展开 Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. It is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起 | |
| Almatis FlameGard® ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, ...展开 Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although FlameGard is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起 | |
| Anhydrite | Provencale S.A. | Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起 | |
| AnTec C-60 | Anpeak Specialty Minerals Co., Ltd. | AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extende...展开 AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender in paints and coatings. 收起 | |
| AnTec C-98 | Anpeak Specialty Minerals Co., Ltd. | AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a f...展开 AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender in coatings, paints, and printing inks. 收起 | |
| AnTec C-OP | Anpeak Specialty Minerals Co., Ltd. | AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low...展开 AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low-sheen architectural paints. It can also serve as an ink receptacle in specialty paper applications. 收起 | |
| AnTec MM | Anpeak Specialty Minerals Co., Ltd. | AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...展开 AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. 收起 | |
| AnTec WE | Anpeak Specialty Minerals Co., Ltd. | AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. ...展开 AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. It contains less than 0.5% free moisture at 105 degrees Celsius. 收起 | |
| Anti-Reflective Application Nano Alumina B8013-2 | Tianjin Boyuan New Materials Co., Ltd. | B8013-2具有小的粒径和出色的分散性，使其在抗反射涂层中十分有效。它可以用于光伏玻璃和PET中。它可以通过减少光反射的方式增加透光率。 | |
| Ballotini® A | Potters Industries Inc. | Ballotini® A is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 20-30 and a particle diameter range of 600-850 microns. Ballotini® A is most commonly used in metal finishing applications. | |
| Ballotini® AA | Potters Industries Inc. | Ballotini® AA is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 40-70 and a particle diameter range of 212-425 microns. Ballotini® AA is most commonly used in metal finishing applications. | |
| Ballotini® AAA | Potters Industries Inc. | Ballotini® AAA is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 25-45 and a particle diameter range of 355-710 microns. Ballotini® AAA is most commonly used in metal finishing applications. | |
| Ballotini® AB | Potters Industries Inc. | Ballotini® AB is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 50-80 and a particle diameter range of 180-300 microns. Ballotini® AB is most commonly used in metal finishing applications. | |
| Ballotini® AC | Potters Industries Inc. | Ballotini® AC is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 60-120 and a particle diameter range of 125-250 microns. Ballotini® AC is most commonly used in metal finishing applications. | |
| Ballotini® AD | Potters Industries Inc. | Ballotini® AD is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 70-140 and a particle diameter range of 106-212 microns. Ballotini® AD is most commonly used in metal finishing applications. | |
| Ballotini® AE | Potters Industries Inc. | Ballotini® AE is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 100-170 and a particle diameter range of 90-150 microns. Ballotini® AE is most commonly used in metal finishing applications. | |
| Ballotini® AG | Potters Industries Inc. | Ballotini® AG is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 120-270 and a particle diameter range of 53-125 microns. Ballotini® AG is most commonly used in metal finishing applications. | |
| Ballotini® AH | Potters Industries Inc. | Ballotini® AH is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 170-325 and a particle diameter range of 45-90 microns. Ballotini® AH is most commonly used in metal finishing applications. | |
| Ballotini® B | Potters Industries Inc. | Ballotini® B is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 30-40 and a particle diameter range of 425-600 microns. Ballotini® B is most commonly used in metal finishing applications. | |
| Ballotini® C | Potters Industries Inc. | Ballotini® C is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 40-60 and a particle diameter range of 250-425 microns. Ballotini® C is most commonly used in metal finishing applications. | |
| Ballotini® D | Potters Industries Inc. | Ballotini® D is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 50-70 and a particle diameter range of 212-300 microns. Ballotini® D is most commonly used in metal finishing applications. | |
| Ballotini® MIL 10 | Potters Industries Inc. | Ballotini® MIL 10 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 100-170 and a particle diameter range of 90-150 microns. Ballotini® MIL 10 is most commonly used in metal finishing application...展开 Ballotini® MIL 10 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 100-170 and a particle diameter range of 90-150 microns. Ballotini® MIL 10 is most commonly used in metal finishing applications. 收起 | |
| Ballotini® MIL 11 | Potters Industries Inc. | Ballotini® MIL 11 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 120-200 and a particle diameter range of 75-125 microns. Ballotini® MIL 11 is most commonly used in metal finishing application...展开 Ballotini® MIL 11 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 120-200 and a particle diameter range of 75-125 microns. Ballotini® MIL 11 is most commonly used in metal finishing applications. 收起 | |
| Ballotini® MIL 12 | Potters Industries Inc. | Ballotini® MIL 12 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 140-230 and a particle diameter range of 63-106 microns. Ballotini® MIL 12 is most commonly used in metal finishing application...展开 Ballotini® MIL 12 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 140-230 and a particle diameter range of 63-106 microns. Ballotini® MIL 12 is most commonly used in metal finishing applications. 收起 | |
| Ballotini® MIL 13 | Potters Industries Inc. | Ballotini® MIL 13 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 170-325 and a particle diameter range of 45-90 microns. Ballotini® MIL 13 is most commonly used in metal finishing applications...展开 Ballotini® MIL 13 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 170-325 and a particle diameter range of 45-90 microns. Ballotini® MIL 13 is most commonly used in metal finishing applications. 收起 | |
| Ballotini® MIL 3 | Potters Industries Inc. | Ballotini® MIL 3 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 20-30 and a particle diameter range of 600-850 microns. Ballotini® MIL 3 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 4 | Potters Industries Inc. | Ballotini® MIL 4 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 30-40 and a particle diameter range of 425-600 microns. Ballotini® MIL 4 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 5 | Potters Industries Inc. | Ballotini® MIL 5 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 40-50 and a particle diameter range of 300-425 microns. Ballotini® MIL 5 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 6 | Potters Industries Inc. | Ballotini® MIL 6 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 50-70 and a particle diameter range of 212-300 microns. Ballotini® MIL 6 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 7 | Potters Industries Inc. | Ballotini® MIL 7 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 60-80 and a particle diameter range of 180-250 microns. Ballotini® MIL 7 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 8 | Potters Industries Inc. | Ballotini® MIL 8 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 70-100 and a particle diameter range of 150-212 microns. Ballotini® MIL 8 is most commonly used in metal finishing applications. | |
| Ballotini® MIL 9 | Potters Industries Inc. | Ballotini® MIL 9 is a military-grade, transparent, colorless, spherical glass microbead. This product has a US Sieve size of 80-120 and a particle diameter range of 125-180 microns. Ballotini® MIL 9 is most commonly used in metal finishing applications. | |
| Barifine® BF Series | Kowa American Corporation | Barifine® BF Series are inorganic encapsulated pigment particles which are highly transparent for use as functional extenders, for haze-free gloss and highly smooth films through hyper-filling effects, for maximizing optical brightness, and to control alu...展开 Barifine® BF Series are inorganic encapsulated pigment particles which are highly transparent for use as functional extenders, for haze-free gloss and highly smooth films through hyper-filling effects, for maximizing optical brightness, and to control aluminum pigment orientation in metallic coatings. They find use in automotive, consumer electronics, printing inks and other markets. 收起 | Request Sample |
| Barifine® BF-1 | Kowa American Corporation | Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsu...展开 Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. 收起 | Request Sample |
| Barifine® BF-10 | Kowa American Corporation | Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encaps...展开 Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. 收起 | Request Sample |
| Barifine® BF-20 | Kowa American Corporation | Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizi...展开 Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizing natural ores. It is used as a general extender pigment because of its relatively high specific gravity and low refractive index. 收起 | Request Sample |
| Barifine® BF-21 | Kowa American Corporation | Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...展开 Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. 收起 | Request Sample |
| Barifine® BF-25 | Kowa American Corporation | Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...展开 Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. 收起 | Request Sample |
| Barifine® BF-26 | Kowa American Corporation | Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...展开 Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. 收起 | Request Sample |
| Barifine® BF-40 | Kowa American Corporation | Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encap...展开 Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. 收起 | Request Sample |
| Bariflor® 8010 | Minerals Girona S.A. | Bariflor® 8010 has a top cut at 10 μm. It is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. | |
| Bariflor® 8015 | Minerals Girona S.A. | Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density o...展开 Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density of 4'35g/cm³. 收起 | |
| Bariflor® 8025 | Minerals Girona S.A. | Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density o...展开 Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density of 4'35g/cm³. 收起 | |
| Bariflor® 8040 | Minerals Girona S.A. | Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...展开 Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8060 | Minerals Girona S.A. | Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...展开 Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8080 | Minerals Girona S.A. | Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8410 | Minerals Girona S.A. | Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8415 | Minerals Girona S.A. | Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8425 | Minerals Girona S.A. | Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8440 | Minerals Girona S.A. | Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8460 | Minerals Girona S.A. | Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...展开 Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Bariflor® 8480 | Minerals Girona S.A. | Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric a...展开 Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. 收起 | |
| Barinit® 7025 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...展开 Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. 收起 | |
| Barinit® 7040 | Minerals Girona S.A. | Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...展开 Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. 收起 | |
| Barinit® 7060 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...展开 Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. 收起 |
