| EXTRUDER PRIOTWIN™ | Bühler Pasta & Extruded Products | With its new PRIOtwin™ extruder Bühler offers a solution tailored to the production of breakfast cereals, food ingredients and petfood. |  |
| EZ-Pi Plus Tensiometer | Kibron Inc. | EZ-Pi Plus is a new single channel tensiometer. EZ-Pi Plus's full potential comes into action when pairing it up with a laptop. It is light-weight, robust and well suited for on-site measurements. You can use both du Noüy and Wilhelmy technique, using the...展开 EZ-Pi Plus is a new single channel tensiometer. EZ-Pi Plus's full potential comes into action when pairing it up with a laptop. It is light-weight, robust and well suited for on-site measurements. You can use both du Noüy and Wilhelmy technique, using the same probe. The cuvette holder can be temperature controlled with an external water bath. Kibron EZ-Pi plus was designed and built with reliability and ease of use in mind. It is a compact size, yet robust and rugged to provide users highest quality data anywhere, anytime. State-of-the-art sensor technology and intuitive user interface makes it a true winner. 收起 |  |
| FAS SPrint Revolution™ SidePouch® Bagger | Automated Packaging Systems Inc. | The FAS SPrint Revolution™ Bagging System brings new levels of speed and versatility to demanding packaging environments that require daily washdown procedures. Operating at speeds up to 900 inches per minute, this state-of-the-art packaging system is des...展开 The FAS SPrint Revolution™ Bagging System brings new levels of speed and versatility to demanding packaging environments that require daily washdown procedures. Operating at speeds up to 900 inches per minute, this state-of-the-art packaging system is designed for the ultimate in bag packaging flexibility, functionality and reliability. 收起 |  |
| Fastfeed Powder Induction and Dispersion | Admix, Inc. | The Fastfeed powder induction and dispersion system delivers controlled feed rates up to 450 lbs/minute. This integrated, skid-mounted system uses a specially designed powder suction pump and proven high-shear technology for rapid incorporation and wettin...展开 The Fastfeed powder induction and dispersion system delivers controlled feed rates up to 450 lbs/minute. This integrated, skid-mounted system uses a specially designed powder suction pump and proven high-shear technology for rapid incorporation and wetting out of difficult powders. 收起 |  |
| Field Service | Admix, Inc. | Field Service is is a division of the Admix Customer Service Team. Our experienced team will visit your facility to provide the following services: start-up assistance, repair or rebuild, equipment audits, and maintenance training. | |
| Films | Co-Pack, Inc. | Films from Co-Pack. | |
| Fine Grinding Service | NETZSCH Grinding & Dispersing | NETZSCH-CONDUX Mahltechnik in Hanau提供的服务包括提供最现代的机器和设备以及训练有素的专业员工进行工艺监督和支持。作为在干碾磨以及细筛分领域世界领先的公司，我们了解什么方面对你来说最重要。我们多种多样的机器程序可为你的要求提供正确的解决方案。我们对于该领域各种产品的长期经验可帮助你定制你的碾磨需求 |  |
| FlowShear™ Bottom Mount Dispersers & Emulsifiers | Admix, Inc. | FlowShear™ Bottom Mount Dispersers & Emulsifiers are ideal for the personal care and cosmetic industry, the FlowShear™ bottom mount disperser and emulsifier offers unrivaled versatility. It allows processors to mix a wide range of batch sizes with minimal...展开 FlowShear™ Bottom Mount Dispersers & Emulsifiers are ideal for the personal care and cosmetic industry, the FlowShear™ bottom mount disperser and emulsifier offers unrivaled versatility. It allows processors to mix a wide range of batch sizes with minimal starting liquid levels and meets the most demanding processing needs and sanitary standards. FlowShear’s™ unique mixing head design provides high shear and superior flow by combining a rotor-stator with an optional impeller utilizing Jetfoil technology. 收起 |  |
| Fluid Bed Wet Granulation Line | MTC Industries, Inc. | Wet granulation line composed of high shear mixer and a fluid bed drier. Machine features a pot with larger diameter for more even granule formation with improved reliability. Clearance between the pot and impeller is controlled within 1.5mm to prevent ma...展开 Wet granulation line composed of high shear mixer and a fluid bed drier. Machine features a pot with larger diameter for more even granule formation with improved reliability. Clearance between the pot and impeller is controlled within 1.5mm to prevent material residue. The system is equipped with PLC control and an anti-explosion system. High Shear Mixer has a capacity of 400L. Fluid Bed Drier has capacity ranging from 80-200kg. 收起 |  |
| Food (or Feed) Additive Petition | Burdock Group | Burdock Group can assist your company with a food or feed that is submitted to FDA to request issuance of a regulation allowing new uses of the additive, and containing the necessary supporting data and information for a food additive intended to have a t...展开 Burdock Group can assist your company with a food or feed that is submitted to FDA to request issuance of a regulation allowing new uses of the additive, and containing the necessary supporting data and information for a food additive intended to have a technical effect in food. 收起 | |
| Forensic Applications | ChromaDex | Many plants and plant-derived materials are of direct interest to forensic scientists, including drug analysts, toxicologists, clinical analysts and sport analysts. | |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金属，是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程，懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。 |  |
| FrymaKoruma Corundum Stone Mill MK 160 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展开 FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 30 - 500kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
| FrymaKoruma Corundum Stone Mill MK 180 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展开 FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. 收起 |  |
| FrymaKoruma Corundum Stone Mill MK 250 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展开 FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 90 - 2'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
| FrymaKoruma Corundum Stone Mill MK 300 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展开 FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 150 - 3'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
| FrymaKoruma Corundum Stone Mill MK 320 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展开 FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 200 - 5'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
| FrymaKoruma Corundum Stone Mill MK 95 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwee...展开 FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 10 - 160kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
| FrymaKoruma Frymix II | Romaco FrymaKoruma | FrymaKoruma Frymix II is a vacuum processing unit for the pharmaceutical and cosmetic industries. The system is designed to meet the stringent sterile application requirements of the pharmaceutical industry and the high quality emulsion and suspension dem...展开 FrymaKoruma Frymix II is a vacuum processing unit for the pharmaceutical and cosmetic industries. The system is designed to meet the stringent sterile application requirements of the pharmaceutical industry and the high quality emulsion and suspension demands of the cosmetic industry. The Frymix II is especially suited to shear-sensitive products thanks to carefully defined energy introduction and a unique guide cone. The adjustable vacuum system enables the in feed of both liquid and dry raw materials. 收起 |  |
| FrymaKoruma Inline Homogenizer DIL 100 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 100 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展开 The FrymaKoruma Inline-Homogenizer DIL 100 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 7'000kg/h. 收起 |  |
| FrymaKoruma Inline Homogenizer DIL 160 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 160 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展开 The FrymaKoruma Inline-Homogenizer DIL 160 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 30'000kg/h. 收起 |  |
| FrymaKoruma Inline Homogenizer DIL 180 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 180 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展开 The FrymaKoruma Inline-Homogenizer DIL 180 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 60'000kg/h. 收起 |  |
| FrymaKoruma Inline Homogenizer DIL 230 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 230 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展开 The FrymaKoruma Inline-Homogenizer DIL 230 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 85'000kg/h. 收起 |  |
| FRYMAKORUMA INMIXX 1300 | Romaco FrymaKoruma | The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use...展开 The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use, rapid batch times and high versatility are features which recommend the InMixx to customers in the food and chemicals industries. 收起 |  |
| FRYMAKORUMA INMIXX 1800 | Romaco FrymaKoruma | The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use...展开 The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use, rapid batch times and high versatility are features which recommend the InMixx to customers in the food and chemicals industries. 收起 |  |
| FRYMAKORUMA INMIXX 200 | Romaco FrymaKoruma | The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use...展开 The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use, rapid batch times and high versatility are features which recommend the InMixx to customers in the food and chemicals industries. 收起 |  |
| FRYMAKORUMA INMIXX 400 | Romaco FrymaKoruma | The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use...展开 The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use, rapid batch times and high versatility are features which recommend the InMixx to customers in the food and chemicals industries. 收起 |  |
| FRYMAKORUMA INMIXX 700 | Romaco FrymaKoruma | The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use...展开 The FrymaKoruma InMixx is a mixing and dispersing unit for the manufacture of semi-solid products within a wide viscosity range. It is particularly adapted to the most viscous products and those with a high proportion of solid ingredients. Its ease of use, rapid batch times and high versatility are features which recommend the InMixx to customers in the food and chemicals industries. 收起 |  |
| FrymaKoruma MaxxD 1300 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 1300 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufact...展开 The FrymaKoruma MaxxD 1300 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
| FrymaKoruma MaxxD 1800 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 1800 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufact...展开 The FrymaKoruma MaxxD 1800 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
| FrymaKoruma MaxxD 200 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 200 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展开 The FrymaKoruma MaxxD 200 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
| FrymaKoruma MaxxD 400 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 400 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展开 The FrymaKoruma MaxxD 400 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
| FrymaKoruma MaxxD 700 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 700 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展开 The FrymaKoruma MaxxD 700 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
| FrymaKoruma MaxxD LAB | Romaco FrymaKoruma | The FrymaKoruma MaxxD Lab is a lab scale vacuum processing unit for the food and cosmetic industry. The MaxxD Lab is ideal for the development of new recipes from formulation to full production as well as for scale up of a wide range of semi-solid product...展开 The FrymaKoruma MaxxD Lab is a lab scale vacuum processing unit for the food and cosmetic industry. The MaxxD Lab is ideal for the development of new recipes from formulation to full production as well as for scale up of a wide range of semi-solid products such as suspensions, crèmes, emulsions, gels, sauces or dressings. 收起 |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 150 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...展开 The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. 收起 |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 180 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...展开 The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. 收起 |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 250 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...展开 The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. 收起 |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 330 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...展开 The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. 收起 |  |
| FrymaKoruma Services | Romaco FrymaKoruma | FrymaKoruma offers process technology and training centre with full service for your machines and plants and a product range including vacuum processing units, mills and inline homogenizers, annular gap bead mill CoBall® Mill, and vacuum deaerators. | |
| FrymaKoruma Stirrer Bead CoBall®-Mill | Romaco FrymaKoruma | The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter ...展开 The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter of grinding media, bead load and flow velocity. Each of these parameters can be varied at will to create the optimum conditions for each product. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 100 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 110 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 130 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 150 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 190 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 250 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 50 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 80 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...展开 The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. 收起 |  |
| FrymaKoruma Vacuum-Deaerator VE I | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE I is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprink...展开 The FrymaKoruma Vacuum-Deaerator VE I is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE I offers continuous deaeration for outstanding product quality with a capacity size of approximately 300 - 1,500kg/h. 收起 |  |
| FrymaKoruma Vacuum-Deaerator VE II | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE II is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展开 The FrymaKoruma Vacuum-Deaerator VE II is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE II offers continuous deaeration for outstanding product quality with a capacity size of approximately 800 - 4,000kg/h. 收起 |  |
| FrymaKoruma Vacuum-Deaerator VE III | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE III is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then spri...展开 The FrymaKoruma Vacuum-Deaerator VE III is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE III offers continuous deaeration for outstanding product quality with a capacity size of approximately 1,600-8,000kg/h. 收起 |  |
| Frymakoruma Vacuum-Deaerator VE IV | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE IV is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展开 The FrymaKoruma Vacuum-Deaerator VE IV is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE IV offers continuous deaeration for outstanding product quality with a capacity size of approximately 3,000-15,000kg/h. 收起 |  |
| FrymaKoruma Vacuum-Deaerator VE V | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE V is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprink...展开 The FrymaKoruma Vacuum-Deaerator VE V is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE V offers continuous deaeration for outstanding product quality with a capacity size of approximately 4,000-20,000kg/h. 收起 |  |
| FrymaKoruma Vacuum-Deaerator VE VI | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE VI is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展开 The FrymaKoruma Vacuum-Deaerator VE VI is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE VI offers continuous deaeration for outstanding product quality with a capacity size of approximately 6,000-30,000kg/h. 收起 |  |
| Furocoumarins | ChromaDex | Furocoumarins, or furanocoumarins, are a class of organic chemical compounds produced by a variety of plants. | |
| Garcinia cambogia | ChromaDex | ChromaDex has significant expertise in the testing of Garcinia cambogia and its extracts. Garcinia, also known by the common names brindall berry and Malabar tamarind, has had significant interest for weight loss support applications and recent media cove...展开 ChromaDex has significant expertise in the testing of Garcinia cambogia and its extracts. Garcinia, also known by the common names brindall berry and Malabar tamarind, has had significant interest for weight loss support applications and recent media coverage. We offer a full suite of analytical services and reference standards for Garcinia. 收起 | |
| Generally Recognized as Safe (GRAS) Determinations | Burdock Group | Burdock Group can lead your ingredient or additive through the Generally Recognized as Safe (GRAS) process by which a substance is determined generally recognized, among experts qualified by scientific training and experience, to be safe under the conditi...展开 Burdock Group can lead your ingredient or additive through the Generally Recognized as Safe (GRAS) process by which a substance is determined generally recognized, among experts qualified by scientific training and experience, to be safe under the conditions of their intended use. This GRAS determination can be self-affirmed, through a panel of experts, or Notified to FDA through the GRAS Notification process. 收起 | |
| Government Agency Representation | Burdock Group | Burdock Group has a long history of communication with the Food and Drug Administration (FDA), as well as the Center for Veterinary Medicine (CVM), the Federal Trade Commission (FTC) and the United States Department of Agriculture (USDA). We can get in to...展开 Burdock Group has a long history of communication with the Food and Drug Administration (FDA), as well as the Center for Veterinary Medicine (CVM), the Federal Trade Commission (FTC) and the United States Department of Agriculture (USDA). We can get in touch with the right people to keep your project timeline intact, as well as schedule meetings and present information on your behalf. 收起 | |
| GRANULATION | ProTab Laboratories | Granulation is ideal for changing the bulk density of botanical herbs and natural raw materials to help facilitate twopiece encapsulation or create more directly compressible tablets. | |
| Hammer Mills | Munson Machinery Co., Inc. | Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mil...展开 Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mills have an extra quarter screen located in the hinged section of the top case, increasing screen area by approximately 50% over that of conventional designs, for a total of 270°. 收起 |  |
| Hauschild SpeedMixer® Brochure | Hauschild GmbH & Co. KG | Since 1974 Hauschild GmbH & Co. KG has been providing innovative mixing solutions worldwide for a wide range of applications. Hauschild SpeedMixer® is the most widely used equipment in laboratories when mixing is a critical part of the R&D process. |  |
| Hauschild SpeedMixer® DAC 150.1 / DAC 250.1 | Hauschild GmbH & Co. KG | The DAC 150.1 and DAC 250.1 are the first generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| Hauschild SpeedMixer® DAC 150.3 / DAC 250.3 | Hauschild GmbH & Co. KG | The DAC 150.3 and DAC 250.3 are the last generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| Hauschild SpeedMixer® DAC 150SP / DAC 250SP | Hauschild GmbH & Co. KG | DAC 150 SP and DAC 250 SP are small machine which allow for programming different speeds within the mixing time window. |  |
| Hauschild SpeedMixer® DAC 3000 / 5000 / 10000 HP | Hauschild GmbH & Co. KG | Large machines offer the possibility to mix larger batches (up to 10 kg = 22 lb) and are suitable to run small production lots. |  |
| Hauschild SpeedMixer® DAC 3000 / 5000 VAC-P | Hauschild GmbH & Co. KG | Large machines can be provided with a vacuum feature to achieve a very homogeneous and completely air bubble-free mixture. |  |
| Hauschild SpeedMixer® DAC 400.1 / 1100.1 | Hauschild GmbH & Co. KG | Machines in the medium range are capable of mixing materials compounds with nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb). |  |
| Hauschild SpeedMixer® DAC 400.1 / 800.1 LR | Hauschild GmbH & Co. KG | Machines in the medium range are available in a LR (long radius) configuration, generally better for mixing materials with low specific weight . |  |
| Hauschild SpeedMixer® DAC 400.2 / 1100.2 VAC-P | Hauschild GmbH & Co. KG | Medium range machines can be provided with a vacuum feature, which allows to achieve a very homogeneous and completely air bubble-free mixture [nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb)] |  |
| Hauschild SpeedMixer® DAC 400.2 / 800.2 VAC-P LR | Hauschild GmbH & Co. KG | 8. Medium range machines with vacuum can be provided with LR (long radius) configuration. |  |
| Haver Tyler CPA: Computerized Particle Analyzer | W.S. Tyler | Haver Tyler CPA is designed for typical laboratory testing of dry, free flowing non-agglomerating particles. The unit uses a high resolution CCD in-line camera and an energy friendly LED light source. The particles are fed down a vibratory channel to fall...展开 Haver Tyler CPA is designed for typical laboratory testing of dry, free flowing non-agglomerating particles. The unit uses a high resolution CCD in-line camera and an energy friendly LED light source. The particles are fed down a vibratory channel to fall freely in front of the light source. As this is happening, the CCD camera is scanning the particles at approximately 20,000 scans per second. 收起 |  |
| High Content Screening Services | BIOalternatives | 高内涵筛选 (HCS)是一个从检索库（化学个体，粗提物，活性物等）中快速选择复合物，功能强大的解决方案。注重细胞培养（原始细胞，细胞系，复合细胞）中的特定生物活性或目标。 |  |
| High Intensity Continuous Blenders | Munson Machinery Co., Inc. | The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of li...展开 The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of liquids, which can also serve to dedust and/or agglomerate dry materials. 收起 |  |
| High Shear Mixer | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| High Speed Bottle Packaging Line | MTC Industries, Inc. | Automatic high-speed bottle packaging line with total capacity: 100-120 bottles/minute. The following equipment is included: High Speed Bottle Unscrambler, Turntable Bottle Unscrambler High Speed Counting Machine, Desiccant Inserting Machine, Cotton Inser...展开 Automatic high-speed bottle packaging line with total capacity: 100-120 bottles/minute. The following equipment is included: High Speed Bottle Unscrambler, Turntable Bottle Unscrambler High Speed Counting Machine, Desiccant Inserting Machine, Cotton Inserting Machine, Screw Capping Machine, Induction Sealing Machine, High Speed Labeling Machine, Thermal Transfer Printer, Intelligent Inkjet Printer, Hugger Belt for Bottom Printing, Automatic Sleeve Shrink Machine and Electro-thermal Shrink Tunnel Machine. 收起 |  |
| High Speed Disperser | Charles Ross & Son Company | ROSS 高速分散机以其耐用、分散速度快和维护成本低的特点成为行业标杆。标准配置包括：防爆装置，变频重型电动机，重型三角皮带传动器和轴承，安全开关，一个带手/足控制的气/油液压升降机，以及不锈钢接液部件和轴承防护罩。设备大小从1/2HP到200HP不等，处理能力分别达到1-200加仑。并可根据客户需求定制。 |  |
| High Speed Tablet Press Machine | MTC Industries, Inc. | High speed rotary tablet press machine can press various granule shapes or powder into ordinary round tablet, irregular shape tablet, single/double sided lettered tablet etc. Capacity varies based on model, the following range from 21,000-69,7000 tablets ...展开 High speed rotary tablet press machine can press various granule shapes or powder into ordinary round tablet, irregular shape tablet, single/double sided lettered tablet etc. Capacity varies based on model, the following range from 21,000-69,7000 tablets / hr. 收起 |  |
| High-Density Polyethylene | Alpha Packaging | Alpha Packaging manufactures and decorates bottles and jars for the nutritional, pharmaceutical, personal care, household and automotive chemical, and food and beverage markets. We work with customers to create functional, attractive and costeffective pac...展开 Alpha Packaging manufactures and decorates bottles and jars for the nutritional, pharmaceutical, personal care, household and automotive chemical, and food and beverage markets. We work with customers to create functional, attractive and costeffective packaging to meet their needs, and also offer more than 750 stock molds. 收起 | |
| High-Speed Mill System Zeta® Type LMZ | NETZSCH Grinding & Dispersing | 高速碾磨系统Zeta®可优化你的产能、能源需求和品质。循环操作和多通道操作设计，可使你获得高产能和高品质，窄粒径分布，可用于更高粘度产品。最小额度控制上的支出是为了确保最高的重现性和省却额外成本。人体工学设计，产品转换和清洗容易，可简化日常操作 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Histology & IHC Services | BIOalternatives | BIOalternatives实验室将分析您提供的细胞和组织样品 |  |
| HM-460 | Co-Pack, Inc. | Automatic Cover-Forming Machine (case maker) | |
| Horizontal Disk Mill | NETZSCH Grinding & Dispersing | 水平圆盘式碾磨机LME和LMK，是连续工作的实验室和生产设备，适合各种应用。圆盘搅拌器轴可高强度地激活碾磨介质充满整个碾磨室。高效分离设备可分离你的产品和碾磨介质。供应各种材料设计和尺寸大小，从实验室到生产规模，可为特定应用定制 |  |
| Human Diagnostic Tests: Providing novel diagnostic tests to help you take control of your health | Nutrasource Diagnostics Inc. | We provide novel human diagnostic tests for consumers, healthcare practitioners and laboratory specialists. Our two major diagnostic offerings include: Novel diagnostic tests which aid in providing the best possible prevention of chronic disease. Research...展开 We provide novel human diagnostic tests for consumers, healthcare practitioners and laboratory specialists. Our two major diagnostic offerings include: Novel diagnostic tests which aid in providing the best possible prevention of chronic disease. Research diagnostic services as a fully integrative solution, customized to all specific client needs including logistics and reporting. 收起 | |
| iCheck™ Carotene | BioAnalyt | iCheck™ Carotene is a state-of-the-art and the first of its kind portable photometer for determining total carotenoids concentration in food and biological fluids such as breast milk and cattle blood. |  |
| iCheck™ Chroma 3 | BioAnalyt | iCheck™ Chroma 3 is our latest development following iCheck™ Chroma. The new feature of iCheck™ Chroma 3 is that it reliably measures vitamin A in an even wider range of vegetable oils, including soybean oil . |  |
| iCheck™ Fluoro | BioAnalyt | iCheck™ Fluoro is a portable fluorometer that determines vitamin A quantitatively in food and biological fluids. Using innovative technology it measures the fluorescence of vitamin A in the sample. |  |
| iCheck™ Iodine | BioAnalyt | iCheck™ Iodine is a portable photometer. The state-of-the–art and the first of its kind photometer determines iodine quantitatively. |  |
| iCheck™ Iron | BioAnalyt | iCheck™ Iron is a portable photometer. The state-of-the–art and the first of its kind photometer determines iron quantitatively. |  |
| Identity Testing Solutions from ChromaDex® | ChromaDex | Full compliance with the FDA cGMPs remains a critical issue for the Dietary Supplement industry. Reliance on raw material vendor certificates is no longer sufficient evidence of identity confirmation and neither is a simple comparison against the first lo...展开 Full compliance with the FDA cGMPs remains a critical issue for the Dietary Supplement industry. Reliance on raw material vendor certificates is no longer sufficient evidence of identity confirmation and neither is a simple comparison against the first lot received. The requirement for 100% ingredient identity testing remains a challenge and concern for many companies. Recent FDA 483 warning letters underline the importance of identity testing for all dietary ingredients using appropriate scientifically valid methods. 收起 | |
| International Fish Oil Standards Program (IFOS) | Nutrasource Diagnostics Inc. | The IFOS™ Program is a third party testing and accreditation program for omega-3 fish oil products. Developed by Nutrasource Diagnostics Inc., the IFOS™ Program ensures that the quality of commercially available fish oil products exceeds international sta...展开 The IFOS™ Program is a third party testing and accreditation program for omega-3 fish oil products. Developed by Nutrasource Diagnostics Inc., the IFOS™ Program ensures that the quality of commercially available fish oil products exceeds international standards established by the Council for Responsible Nutrition (CRN) and the World Health Organization (WHO). 收起 | |
| International Krill Oil Standards Program (IKOS) | Nutrasource Diagnostics Inc. | The IKOS™ Program is a third party testing and accreditation program for omega-3 krill oil products. Developed by Nutrasource Diagnostics Inc., the IKOS™ Program ensures that the quality of commercially available krill oil products exceeds international s...展开 The IKOS™ Program is a third party testing and accreditation program for omega-3 krill oil products. Developed by Nutrasource Diagnostics Inc., the IKOS™ Program ensures that the quality of commercially available krill oil products exceeds international standards established by the Council for Responsible Nutrition (CRN) and the World Health Organization (WHO). 收起 | |
| IsoLife | ChromaDex | Stable isotope labeled phytochemicals & plant products for your research needs. | |
| Kratom | ChromaDex | Kratom is a medicinal leaf harvested from a large tree in the Rubiaceae family native to Southeast Asia. | |
| LA-300 - Portable Routine Laser Diffraction Analyzer | HORIBA Instruments, Inc. | The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...展开 The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. 收起 |  |
| LA-950 - High Performance Laser Diffraction Analyzer | HORIBA Instruments, Inc. | LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...展开 LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. 收起 |  |
| Label Reviews | Burdock Group | Burdock Group can provide an analysis of your product’s label to identify any gaps in compliance of that label in the country or countries that the product is being marketed. In the U.S., Burdock Group can give you an in-depth analysis of all substances o...展开 Burdock Group can provide an analysis of your product’s label to identify any gaps in compliance of that label in the country or countries that the product is being marketed. In the U.S., Burdock Group can give you an in-depth analysis of all substances on your label and their regulatory status, the nutrition content, claims, and everything that you need to do in order to guarantee that your label is compliant with both Food and Drug Administration (FDA) and Federal Trade Commission (FTC) regulations. 收起 | |
| Laboratory Agitator Bead Mill LabStar | NETZSCH Grinding & Dispersing | 多功能实验室碾磨机LabStar，适合有难度的学术工作研发任务，操作简便。碾磨结果，细度可达纳米级，可精确放大到生产大批量设备 |  |
| Laboratory De-Aerator Minivac | NETZSCH Grinding & Dispersing | 专门开发的仪器，用于小批量或首次测试，例如NETZSCH真空脱气器，根据VTR（真空薄膜轮换程序）原理工作。由于调整了储罐的位置，MiniVac操作简便。其它优势还包括易清洁和易维护 |  |
| Laboratory Mini-Cutters | Munson Machinery Co., Inc. | Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same ma...展开 Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same materials and offer similar size reduction characteristics but at lower capacities. Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. 收起 |  |
