| BYK®-016 | BYK | BYK®-016是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑 | |
| BYK®-022 | BYK | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-023 | BYK | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-024 | BYK | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-025 | BYK | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-028 | BYK | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-035 | BYK | 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑，消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。 | |
| BYK®-037 | BYK | 礦物油消泡劑，適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑，用於消除生產和施工過程中產生的泡沫 | |
| BYK®-038 | BYK | 礦物油消泡劑，適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑，可消除其生產和施工過程中產生的泡沫 | |
| BYK®-077 | BYK | 硅樹脂消泡劑，防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能，特別是流平性，提高表面滑爽度，改善抗刮擦和耐劃傷性。 | |
| BYK®-085 | BYK | 含硅消泡劑和表面助劑，適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本，尤其適用於需要無溶劑助劑或需要特殊溶劑的體系 | |
| BYK®-088 | BYK | 含硅脫氣劑，推薦用於PUR基膠粘劑。也適用於環氧體系 | |
| BYK®-093 | BYK | 高耐久性含硅消泡劑，適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性 | |
| BYK®-1610 | BYK | BYK®-1610是一種消泡劑，適用於基於乳膠的膠粘劑和密封劑 | |
| BYK®-1615 | BYK | BYK®-1615是一種消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-3400 | BYK | BYK®-3400是一種含硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性 | |
| BYK®-3410 | BYK | BYK®-3410是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性 | |
| BYK®-345 | BYK | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。 | |
| BYK®-346 | BYK | 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。 | |
| BYK®-347 | BYK | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。 | |
| BYK®-348 | BYK | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有良好的基材滑爽性和流平性。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。 | |
| BYK®-349 | BYK | BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。 | |
| BYK®-9076 | BYK | BYK®-9076是一種高分子量助劑，適用於無溶劑膠粘劑和密封劑，BYK®-9076尤其適用於酸性和中性炭黑的穩定 | |
| BYK®-9077 | BYK | 用於無溶劑型濃縮顏料的新型高分子添加劑，用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。 | |
| BYK®-A 530 | BYK | 脫氣劑和消泡劑，適合溶劑型和無溶劑環氧體系 | |
| BYK®-A 535 | BYK | 無硅消泡劑/脫氣劑，適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑 | |
| BYK®-A 550 | BYK | BYK®-A 550具有強脫氣效果，卻不會導致強霧影效果 | |
| BYK®-A 555 | BYK | BYK®-A 555應用於各種膠粘劑具有最高效率 | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力，從而改善基材潤濕性 | |
| BYK®-W 940 | BYK | BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降，並減少無機和有機顏料的浮色和發花 | |
| BYK®-W 961 | BYK | BYK®-W 961可作為潤濕和分散劑，阻止礦物填料沉降 | |
| BYK®-W 966 | BYK | BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降 | |
| BYK®-W 969 | BYK | BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑，並降低其粘度 | |
| BYK®-W 980 | BYK | BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降 | |
| BYK®-W 985 | BYK | BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度，從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用 | |
| CAB-O-SIL® EH-5F | Univar Solutions | CAB-O-SIL® EH-5F is a high-purity material that can act as carrier, flavor masking, anti-settling, thickening, anti-caking, and fat substitution additives in food applications. | Request Sample |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展開 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
| CAB-O-SIL® EH5 | Univar Solutions | CAB-O-SIL® EH5 is a very high surface fumed silica which can increase the viscosity of liquid systems and provide significant reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...展開 CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. 收起 | |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...展開 CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. 收起 | Request Sample |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...展開 CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. 收起 | |
| CAB-O-SIL® LM150 | Univar Solutions | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...展開 CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. 收起 | Request Sample |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...展開 CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. 收起 | |
| CAB-O-SIL® M-5 | Univar Solutions | CAB-O-SIL® M-5 is a medium surface fumed silica which enables a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® M-5F | Univar Solutions | CAB-O-SIL® M-5F is a high-purity material that can act as a carrier and a flavor masking, anti-settling, thickening, anti-caking, and fat substitution additive in food applications. | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone r...展開 CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. 收起 | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silic...展開 CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. 收起 | Request Sample |
| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...展開 CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. 收起 | Request Sample |
| CAB-O-SIL® TS-382 | Univar Solutions | CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performa...展開 CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance than untreated silica. 收起 | Request Sample |
| CAB-O-SIL® TS5022 | Univar Solutions | CAB-O-SIL® TS5022 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...展開 CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. 收起 | |
| CAB-O-SIL® TS530 | Univar Solutions | CAB-O-SIL® TS530 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls in the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...展開 CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 收起 | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...展開 CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. 收起 | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...展開 CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. 收起 | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...展開 CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. 收起 | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...展開 CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起 | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...展開 CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...展開 CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. 收起 | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...展開 CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | CARBOWET® 138表面活性劑是一種多功能添加劑，適用於顏料和基材潤濕。這種非離子型表面活性劑通常是單獨使用或與陰離子表面活性劑組合使用。該成本有效的表面活性劑可提供快速基材和顏料潤濕性，並適合各種應用。 | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | 作為一種基材潤濕劑，Surfynol CT-211 可應用於水性涂料、油墨、膠粘劑和許多其它體系中。用量約為總配方量的0.1∼3.0% | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | 在顏料碾磨應用中，Surfynol CT-221 可通過對顏料顆粒較好的潤濕和碾磨氣泡控制來增加展色性。它可在高顏料負載量下提供低粘度和出色的分散穩定性 | |
| CARDIS™ 325 | Univar Solutions | CARDIS™ 325 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and...展開 CARDIS™ 325 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and also improve solvent solubility as compared to inert polymers. Physical property characteristics include a range of melt points, hardness levels, and melt viscosities. 收起 | Request Sample |
| CARDIS™ 36 | Univar Solutions | CARDIS™ 36 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and ...展開 CARDIS™ 36 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and also improve solvent solubility as compared to inert polymers. Physical property characteristics include a range of melt points, hardness levels, and melt viscosities. 收起 | Request Sample |
| Castor Oil Ethoxylates - PEG-25-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...展開 Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. 收起 | |
| Castor Oil Ethoxylates - PEG-40-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...展開 Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. 收起 | |
| Castor Oil Ethoxylates - PEG-60-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, ...展開 Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. 收起 | |
| Castor Oil Ethoxylates - PEG-7-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber,...展開 Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. 收起 | |
| Castor Oil Pale Pressed | Welch, Holme & Clark Co., Inc. | Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for ...展開 Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a specific gravity of 0.957 to 0.961 at 25°C, an iodine value of 83 to 88, and a hydroxyl value of 160 to 168. 收起 | |
| Castor Oil U.S.P. | Welch, Holme & Clark Co., Inc. | Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil i...展開 Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil is used as a drying oil in the paints, inks, and varnishes. Castor oil is popular due to the fact that its plentiful chemical derivatives are a "renewable sources, bio-degradable and eco-friendly." Castor Oil U.S.P. has a specific gravity between the ranges of 0.957 to 0.961 at 25°C and a saponification value of 176 to 182. 收起 | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...展開 CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. 收起 | Request Sample |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| CELLOSIZE™ QP 100MH | Univar Solutions | 陶氏化學公司提供的最高分子量纖維質聚合物和CELLOSIZE QP 100MH HEC水性溶液是流變學中最假塑性的（非牛頓流體）。CELLOSIZE QP 100MH HEC可用於增稠家用清潔產品，制造廁所水箱清潔球和其它主要要求非常高增稠效果的應用中 | Request Sample |
| CELLOSIZE™ QP 15000H | Univar Solutions | 中等分子量纖維質聚合物,可作為通用型增稠劑用於水性體系包括乳膠漆、個人護理產品和家用清潔產品。在乳膠漆中， CELLOSIZE QP 15000H HEC典型的用量是每100加侖4-6磅，在個人護理品和家用清潔劑中，CELLOSIZE QP 15000H HEC的用量通常在0.5%-1%之間 | Request Sample |
| CELLOSIZE™ QP 300 | Univar Solutions | 中等到低分子量纖維質聚合物,可用作保護膠體和乳膠漆增稠劑。乙烯基和丙烯酸單體乳液聚合可制備應用於建筑涂料的乳膠。CELLOSIZE QP 300 HEC在乳膠合成中典型的添加量為乙烯基和乙烯基-丙烯酸乳膠配方（通常在全丙烯酸配方中較少）重量（基於總單體）的2% | Request Sample |
| CELLOSIZE™ QP 30000H | Univar Solutions | 中等到高分子量纖維質聚合物,可用作通用型增稠劑用於水性體系包括乳膠漆、個人護理產品和家用清潔產品。在乳膠漆中，CELLOSIZE QP 30000H HEC典型的用量是每100加侖4-6磅，在個人護理品和家用清潔劑中，CELLOSIZE QP 30000H HEC的用量通常在0.5%-1%之間 | Request Sample |
| CELLOSIZE™ QP 4400H | Univar Solutions | 中等分子量纖維質聚合物,可作為通用型增稠劑，主要用於乳膠漆增稠劑。它出色的流變性可為油漆提供良好的流平性能 | Request Sample |
| CELLOSIZE™ QP 52000H | Univar Solutions | 高分子量纖維質聚合物，可提供高增稠效果，並作為通用型增稠劑用於水性體系包括乳膠漆、個人護理產品、家用清潔產品和帶條粘接縫填補劑 | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | 非常高分子量的羥乙基纖維素。該產品經表面處理以避免溶於水性體系時的凝膠或結塊 | Request Sample |
| CERAMER™ 1608 | Univar Solutions | CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or ...展開 CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. 收起 | Request Sample |
| CERAMER™ 67 | Univar Solutions | CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or hi...展開 CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. 收起 | Request Sample |
| CERETAN T 90 | Munzing Chemie | CERETAN T 90 is a white fine granule that is a homopolymer hard paraffin. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives. | |
| CERETAN T 91 | Munzing Chemie | CERETAN T 91 is a white fine granule that is a high metling fischer-tropsch wax. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展開 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展開 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展開 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展開 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展開 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展開 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展開 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展開 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展開 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 |
