| Filling- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labelin...展開 Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labeling machine. 收起 |  |
|
| FlowShear™ Bottom Mount Dispersers & Emulsifiers | Admix, Inc. | FlowShear™ Bottom Mount Dispersers & Emulsifiers are ideal for the personal care and cosmetic industry, the FlowShear™ bottom mount disperser and emulsifier offers unrivaled versatility. It allows processors to mix a wide range of batch sizes with minimal...展開 FlowShear™ Bottom Mount Dispersers & Emulsifiers are ideal for the personal care and cosmetic industry, the FlowShear™ bottom mount disperser and emulsifier offers unrivaled versatility. It allows processors to mix a wide range of batch sizes with minimal starting liquid levels and meets the most demanding processing needs and sanitary standards. FlowShear’s™ unique mixing head design provides high shear and superior flow by combining a rotor-stator with an optional impeller utilizing Jetfoil technology. 收起 |  |
|
| Fluidicam™ RHEO | Formulaction Inc. | A novel device, the Fluidicam™ RHEO is a microfluidic rheometer where the viscosity of samples are visually measured under shear and temperature sweeps. Strong confinement of flow of a sample and a reference solution inside of a microfluidic chip allows f...展開 A novel device, the Fluidicam™ RHEO is a microfluidic rheometer where the viscosity of samples are visually measured under shear and temperature sweeps. Strong confinement of flow of a sample and a reference solution inside of a microfluidic chip allows for fast analysis of samples in the matter of minutes. Over five orders of magniture of shear and six orders of magnitude of viscosity can be measured with a single set of disposable chips while utilizing only milliliters per flow curve or as low as 100 microliters per point. 收起 |  |
|
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金屬，是在超過1000 °C的條件下處理或精煉熔化的。為了確保最終產品的始終一致的高品質以及優化能源密集型的過程，懂得熔體粘度是非常重要的。該熔爐流變儀系統(FRS 1600)結合流變儀和實驗室火爐可測量超過1600 °C。 |  |
|
| FrymaKoruma Corundum Stone Mill MK 160 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展開 FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 30 - 500kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
|
| FrymaKoruma Corundum Stone Mill MK 180 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展開 FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. 收起 |  |
|
| FrymaKoruma Corundum Stone Mill MK 250 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展開 FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 90 - 2'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
|
| FrymaKoruma Corundum Stone Mill MK 300 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展開 FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 150 - 3'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
|
| FrymaKoruma Corundum Stone Mill MK 320 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...展開 FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 200 - 5'000kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
|
| FrymaKoruma Corundum Stone Mill MK 95 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwee...展開 FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 10 - 160kg/h and a product fineness of approx. 40 - 200μm. 收起 |  |
|
| Frymakoruma Dinex 1300 | Romaco FrymaKoruma | The FrymaKoruma Dinex 1300 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pr...展開 The FrymaKoruma Dinex 1300 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 200 | Romaco FrymaKoruma | The Frymakoruma Dinex 200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pro...展開 The Frymakoruma Dinex 200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. 收起 |  |
|
| Frymakoruma Dinex 2400 | Romaco FrymaKoruma | The FrymaKoruma Dinex 2400 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pr...展開 The FrymaKoruma Dinex 2400 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 3500 | Romaco FrymaKoruma | The FrymaKoruma Dinex 3500 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pr...展開 The FrymaKoruma Dinex 3500 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 400 | Romaco FrymaKoruma | The FrymaKoruma Dinex 400 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pro...展開 The FrymaKoruma Dinex 400 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 4200 | Romaco FrymaKoruma | The FrymaKoruma Dinex 4200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pr...展開 The FrymaKoruma Dinex 4200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 5200 | Romaco FrymaKoruma | The FrymaKoruma Dinex 5200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pr...展開 The FrymaKoruma Dinex 5200 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex 700 | Romaco FrymaKoruma | The FrymaKoruma Dinex 700 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid pro...展開 The FrymaKoruma Dinex 700 is a vacuum processing unit for the pharmaceutical and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. All semi-solid products such as suspensions, crèmes, emulsions, and gels can be reliably manufactured in a fast and efficient way. Even a sterile version of the Dinex is available. 收起 |  |
|
| Frymakoruma Dinex Lab | Romaco FrymaKoruma | The FrymaKoruma Dinex Lab is a laboratory-scale version of the high-performance Dinex vacuum processing unit, used principally in the pharmaceutical and cosmetics industry. The Dinex Lab is ideal for the development of new recipes from formulation to full...展開 The FrymaKoruma Dinex Lab is a laboratory-scale version of the high-performance Dinex vacuum processing unit, used principally in the pharmaceutical and cosmetics industry. The Dinex Lab is ideal for the development of new recipes from formulation to full production as well as for scale up of a wide range of semi-solid products such as suspensions, cremes, emulsions and gels. 收起 |  |
|
| FrymaKoruma Frymix II | Romaco FrymaKoruma | FrymaKoruma Frymix II is a vacuum processing unit for the pharmaceutical and cosmetic industries. The system is designed to meet the stringent sterile application requirements of the pharmaceutical industry and the high quality emulsion and suspension dem...展開 FrymaKoruma Frymix II is a vacuum processing unit for the pharmaceutical and cosmetic industries. The system is designed to meet the stringent sterile application requirements of the pharmaceutical industry and the high quality emulsion and suspension demands of the cosmetic industry. The Frymix II is especially suited to shear-sensitive products thanks to carefully defined energy introduction and a unique guide cone. The adjustable vacuum system enables the in feed of both liquid and dry raw materials. 收起 |  |
|
| FrymaKoruma Inline Homogenizer DIL 100 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 100 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展開 The FrymaKoruma Inline-Homogenizer DIL 100 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 7'000kg/h. 收起 |  |
|
| FrymaKoruma Inline Homogenizer DIL 160 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 160 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展開 The FrymaKoruma Inline-Homogenizer DIL 160 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 30'000kg/h. 收起 |  |
|
| FrymaKoruma Inline Homogenizer DIL 180 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 180 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展開 The FrymaKoruma Inline-Homogenizer DIL 180 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 60'000kg/h. 收起 |  |
|
| FrymaKoruma Inline Homogenizer DIL 230 | Romaco FrymaKoruma | The FrymaKoruma Inline-Homogenizer DIL 230 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine ...展開 The FrymaKoruma Inline-Homogenizer DIL 230 is based on the rotor/stator principle in a multi chamber system. In the first chamber there is a special mixing and feeding combination, followed by the homogenizing system, a toothed rotor/stator. This machine is suitable for emulsifying and suspending of liquid and pasty products such as ointments, creams, emulsions and suspensions. This homogenizer has a capacity range of approximately 85'000kg/h. 收起 |  |
|
| FrymaKoruma MaxxD 1300 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 1300 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufact...展開 The FrymaKoruma MaxxD 1300 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
|
| FrymaKoruma MaxxD 1800 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 1800 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufact...展開 The FrymaKoruma MaxxD 1800 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
|
| FrymaKoruma MaxxD 200 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 200 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展開 The FrymaKoruma MaxxD 200 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
|
| FrymaKoruma MaxxD 400 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 400 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展開 The FrymaKoruma MaxxD 400 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
|
| FrymaKoruma MaxxD 700 | Romaco FrymaKoruma | The FrymaKoruma MaxxD 700 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufactu...展開 The FrymaKoruma MaxxD 700 is a vacuum processing unit for the food and cosmetic industry. Due to its wide ranges of features its ideal for the manufacture of different products with a wide variation of processing requirements. It is used for the manufacture of all semi-solid products such as suspensions, emulsions and gels up to a viscosity of 80.000mPas. The exchangeable homogenizer allows to use the perfect tool for each product. 收起 |  |
|
| FrymaKoruma MaxxD LAB | Romaco FrymaKoruma | The FrymaKoruma MaxxD Lab is a lab scale vacuum processing unit for the food and cosmetic industry. The MaxxD Lab is ideal for the development of new recipes from formulation to full production as well as for scale up of a wide range of semi-solid product...展開 The FrymaKoruma MaxxD Lab is a lab scale vacuum processing unit for the food and cosmetic industry. The MaxxD Lab is ideal for the development of new recipes from formulation to full production as well as for scale up of a wide range of semi-solid products such as suspensions, crèmes, emulsions, gels, sauces or dressings. 收起 |  |
|
| FrymaKoruma Services | Romaco FrymaKoruma | FrymaKoruma offers process technology and training centre with full service for your machines and plants and a product range including vacuum processing units, mills and inline homogenizers, annular gap bead mill CoBall® Mill, and vacuum deaerators. | ||
| FrymaKoruma Stirrer Bead CoBall®-Mill | Romaco FrymaKoruma | The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter ...展開 The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter of grinding media, bead load and flow velocity. Each of these parameters can be varied at will to create the optimum conditions for each product. 收起 |  |
|
| FrymaKoruma Vacuum-Deaerator VE I | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE I is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprink...展開 The FrymaKoruma Vacuum-Deaerator VE I is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE I offers continuous deaeration for outstanding product quality with a capacity size of approximately 300 - 1,500kg/h. 收起 |  |
|
| FrymaKoruma Vacuum-Deaerator VE II | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE II is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展開 The FrymaKoruma Vacuum-Deaerator VE II is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE II offers continuous deaeration for outstanding product quality with a capacity size of approximately 800 - 4,000kg/h. 收起 |  |
|
| FrymaKoruma Vacuum-Deaerator VE III | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE III is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then spri...展開 The FrymaKoruma Vacuum-Deaerator VE III is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE III offers continuous deaeration for outstanding product quality with a capacity size of approximately 1,600-8,000kg/h. 收起 |  |
|
| Frymakoruma Vacuum-Deaerator VE IV | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE IV is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展開 The FrymaKoruma Vacuum-Deaerator VE IV is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE IV offers continuous deaeration for outstanding product quality with a capacity size of approximately 3,000-15,000kg/h. 收起 |  |
|
| FrymaKoruma Vacuum-Deaerator VE V | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE V is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprink...展開 The FrymaKoruma Vacuum-Deaerator VE V is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE V offers continuous deaeration for outstanding product quality with a capacity size of approximately 4,000-20,000kg/h. 收起 |  |
|
| FrymaKoruma Vacuum-Deaerator VE VI | Romaco FrymaKoruma | The FrymaKoruma Vacuum-Deaerator VE VI is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprin...展開 The FrymaKoruma Vacuum-Deaerator VE VI is the perfect solution for eliminating air in all kinds of semi solid and liquid products. The products with air or gas pockets are distributed in a thin layer on a centrifugal disc with a sieve. They are then sprinkled into the vessel by means of a screening frame. The air and gas pockets expand under vacuum, causing the bubbles to burst and the liberated pockets are exhausted by the vacuum pump. The FrymaKoruma Vacuum-Deaerator VE VI offers continuous deaeration for outstanding product quality with a capacity size of approximately 6,000-30,000kg/h. 收起 |  |
|
| Fully Hydraulic Three-Roll Mills SDX, SDW, SDY, SDV(E) | Buhler Grinding & Dispersing Technologies | 全水壓三輥研磨機可以應用於諸多不同領域，最適合應用於中等到高粘度的產品，例如，各種印刷油墨、藝術顏料、工業裝飾漆、調色劑、涂料組合物和潤滑劑，也可作為電子和化妝品工業的原材料。三輥研磨機設計應用於滿足高質量需求，同時也滿足方便、易於操作和快速清潔需求 |  |
|
| Get the Look 2.0: Virtual Makeover | BASF Personal Care | Transform your hair, change your makeup, erase your wrinkles — it's all virtually possible with BASF products and formulations! Try on different effect pigments, anti-aging actives or styling polymers to see these products in action! Choose a photo from t...展開 Transform your hair, change your makeup, erase your wrinkles — it's all virtually possible with BASF products and formulations! Try on different effect pigments, anti-aging actives or styling polymers to see these products in action! Choose a photo from the Model Library, or upload your own picture and experiment with the latest trends and products from BASF Care Creations. 收起 | ||
| Government Agency Representation | Burdock Group | Burdock Group has a long history of communication with the Food and Drug Administration (FDA), as well as the Center for Veterinary Medicine (CVM), the Federal Trade Commission (FTC) and the United States Department of Agriculture (USDA). We can get in to...展開 Burdock Group has a long history of communication with the Food and Drug Administration (FDA), as well as the Center for Veterinary Medicine (CVM), the Federal Trade Commission (FTC) and the United States Department of Agriculture (USDA). We can get in touch with the right people to keep your project timeline intact, as well as schedule meetings and present information on your behalf. 收起 | ||
| Hammer Mills | Munson Machinery Co., Inc. | Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mil...展開 Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mills have an extra quarter screen located in the hinged section of the top case, increasing screen area by approximately 50% over that of conventional designs, for a total of 270°. 收起 |  |
|
| Hauschild SpeedMixer® Brochure | Hauschild GmbH & Co. KG | Since 1974 Hauschild GmbH & Co. KG has been providing innovative mixing solutions worldwide for a wide range of applications. Hauschild SpeedMixer® is the most widely used equipment in laboratories when mixing is a critical part of the R&D process. |  |
|
| Hauschild SpeedMixer® DAC 150.1 / DAC 250.1 | Hauschild GmbH & Co. KG | The DAC 150.1 and DAC 250.1 are the first generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
|
| Hauschild SpeedMixer® DAC 150.3 / DAC 250.3 | Hauschild GmbH & Co. KG | The DAC 150.3 and DAC 250.3 are the last generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
|
| Hauschild SpeedMixer® DAC 150SP / DAC 250SP | Hauschild GmbH & Co. KG | DAC 150 SP and DAC 250 SP are small machine which allow for programming different speeds within the mixing time window. |  |
|
| Hauschild SpeedMixer® DAC 3000 / 5000 / 10000 HP | Hauschild GmbH & Co. KG | Large machines offer the possibility to mix larger batches (up to 10 kg = 22 lb) and are suitable to run small production lots. |  |
|
| Hauschild SpeedMixer® DAC 3000 / 5000 VAC-P | Hauschild GmbH & Co. KG | Large machines can be provided with a vacuum feature to achieve a very homogeneous and completely air bubble-free mixture. |  |
|
| Hauschild SpeedMixer® DAC 400.1 / 800.1 LR | Hauschild GmbH & Co. KG | Machines in the medium range are available in a LR (long radius) configuration, generally better for mixing materials with low specific weight . |  |
|
| Hauschild SpeedMixer® DAC 400.2 / 1100.2 VAC-P | Hauschild GmbH & Co. KG | Medium range machines can be provided with a vacuum feature, which allows to achieve a very homogeneous and completely air bubble-free mixture [nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb)] |  |
|
| Hauschild SpeedMixer® DAC 400.2 / 800.2 VAC-P LR | Hauschild GmbH & Co. KG | 8. Medium range machines with vacuum can be provided with LR (long radius) configuration. |  |
|
| HCE / Corneal Epithelium | Skin Ethic Laboratories | HCE / Corneal Epithelium is 0,5 cm² epithelium reconstituted by airlifted culture of transformed human keratinocytes for 5 days in chemically defined medium on inert polycarbonate filters. | ||
| HGE / Gingivalm Epithelium | Skin Ethic Laboratories | HGE / Gingivalm Epithelium is 0.5 cm² epithelium reconstituted by airlifted culture of transformed human keratinocytes for 5 days in chemically defined medium on inert polycarbonate filters. | ||
| High Content Screening Services | BIOalternatives | 高內涵篩選 (HCS)是一個從檢索庫（化學個體，粗提物，活性物等）中快速選擇複合物，功能強大的解決方案。注重細胞培養（原始細胞，細胞系，複合細胞）中的特定生物活性或目標。 |  |
|
| High Intensity Continuous Blenders | Munson Machinery Co., Inc. | The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of li...展開 The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of liquids, which can also serve to dedust and/or agglomerate dry materials. 收起 |  |
|
| High Shear Mixer | Charles Ross & Son Company | 所有的轉子/定子都是由一個固定在定子上的高速轉子組成的。在一個單元中，轉子包括單獨的四片葉子。當旋轉葉片通過每一個開著的定子的時候，他們機械的剪切微粒或液滴，在高速下將物質驅開到周圍的混合器中，帶來極大的壓力。 |  |
|
| High Speed Disperser | Charles Ross & Son Company | ROSS 高速分散機以其耐用、分散速度快和維護成本低的特點成為行業標杆。標准配置包括：防爆裝置，變頻重型電動機，重型三角皮帶傳動器和軸承，安全開關，一個帶手/足控制的氣/油液壓升降機，以及不鏽鋼接液部件和軸承防護罩。設備大小從1/2HP到200HP不等，處理能力分別達到1-200加侖。並可根據客戶需求定制。 |  |
|
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自動流變儀。流變學測量是由高質量的MCR流變儀完成的，同時由一個機器人控制所有其他項目的測量。 |  |
|
| Histology & IHC Services | BIOalternatives | BIOalternatives實驗室將分析您提供的細胞和組織樣品 |  |
|
| HOE / Oral Epithelium | Skin Ethic Laboratories | HOE / Oral Epithelium is 0.5 cm² epithelium reconstituted by airlifted culture of transformed human keratinocytes for 5 days in chemically defined medium on inert polycarbonate filters. | ||
| HVE / Vaginal Epithelium | Skin Ethic Laboratories | HVE / Vaginal Epithelium is 0.5 cm² epithelium reconstituted by airlifted culture of transformed human keratinocytes for 5 days in chemically defined medium on inert polycarbonate filters. | ||
| Image Analysis | International Research Services, Inc. (IRSI) | Image analysis for brightness, matte effect, pores, dark spots, skin homogeneity, porphyrins, wrinkles, eyeshadow/lipstick durability, dark circles under eyes,facial contour, droopy eyelid, lip volume, lip moisturization, lip texture, erythema/irritation,...展開 Image analysis for brightness, matte effect, pores, dark spots, skin homogeneity, porphyrins, wrinkles, eyeshadow/lipstick durability, dark circles under eyes,facial contour, droopy eyelid, lip volume, lip moisturization, lip texture, erythema/irritation, acne, pollution, hair, and eyelashes/mask. 收起 | ||
| IRSI Hair Testing | International Research Services, Inc. (IRSI) | The methodologies are divided into two areas: Clinical Efficacy and Hair Metrology. Clinical Efficacy aims to answer problems related to anomalies of the scalp that alter the healthy aspect of the hair and the quality of life of the people with these an...展開 The methodologies are divided into two areas: Clinical Efficacy and Hair Metrology. Clinical Efficacy aims to answer problems related to anomalies of the scalp that alter the healthy aspect of the hair and the quality of life of the people with these anomalies. In this area, the increase or reduction of sebum and oiliness are tested, as well as the appearance or decrease of dandruff caused by the factors mentioned above and the growth and strengthening of the bulb and the hair on subjects with the most diverse types of hair in our extensive subjects’ database. The clinical efficacy area also has a monitored collection of hair swatches for specific studies. Hair Metrology is directed, mainly, to proving the efficacy of cosmetic products in hair swatches acquired from certified suppliers and following a strict ethics code. We do not buy hair from suspect sources of smuggling; we always certify that the hair was donated voluntarily and no damage or trauma was caused to the donor. All the purchased hair goes through a quality control process before being used in tests. In the end, we provide performance evaluation reports of the most common consumer attributes, such as: softness, shine, frizz and volume control, moisturizing, hair conditioning, strength, oil reduction, hydration, breakage reduction, hair loss, anti-dandruff, hair nutrition, repair, heat protection, color maintenance, split ends prevention, curly hair motion, and curl retention. 收起 | ||
| IRSI Patch Test | International Research Services, Inc. (IRSI) | Evaluating the occurrence of allergic or irritative responses by contacting products with the skin in maximized protocols is an excellent way to assess the safety of topical products. The tests include compatibility, potential irritation, clinical testing...展開 Evaluating the occurrence of allergic or irritative responses by contacting products with the skin in maximized protocols is an excellent way to assess the safety of topical products. The tests include compatibility, potential irritation, clinical testing, safety testing, photoallergy, phototoxicity, primary irritation, HRIPT, cumulative irritation, patch test, Human Repeat Insult Patch Test, non-comedogenic, non-acnegenic, and hypoallergenic. 收起 | ||
| IRSI SPF Test | International Research Services, Inc. (IRSI) | Specialized in dermatological efficacy and safety tests, IRSI is a leader in the use and analysis of instrumental biophysics on the effects of products on human skin. The science and technology applied by IRSI in dermatological assessments offer efficacy ...展開 Specialized in dermatological efficacy and safety tests, IRSI is a leader in the use and analysis of instrumental biophysics on the effects of products on human skin. The science and technology applied by IRSI in dermatological assessments offer efficacy and quality in safety tests, transmitting reliable results for a vast array of medicines, cosmetics and dermo-cosmetics. Photoprotection tests offered by IRSI include: Static SPF (FDA and ISO 24444), Broad Spectrum (FDA), UVA Protection PPD & In Vitro (ISO 24442 AND ISO 24443), Water Resistance (FDA and COLIPA), and UV Protection of Fabrics (AS/NZS 4399). 收起 | ||
| IRSI Use Test | International Research Services, Inc. (IRSI) | The IRSI Use Test is a method to evaluate the performance of products. This type of test can also provide information on consumer behaviors to design an intuitive product (easy and practical) in consumers' lives. | ||
| IRSI Use Test | International Research Services, Inc. (IRSI) | The use of cosmetics is a common practice and has increased in recent years. As a result, concerns about the safety and efficacy of products on a wide range of skin types have also increased, from a baby's delicate skin to mature skin with other specific ...展開 The use of cosmetics is a common practice and has increased in recent years. As a result, concerns about the safety and efficacy of products on a wide range of skin types have also increased, from a baby's delicate skin to mature skin with other specific care needs. The IRSI Use Test assesses the real conditions of use and acceptance of topical products through the non-occurrence of allergies and irritability, in addition to proof of claims involving one or more medical specialties in the studies. The tests include safety testing, efficacy testing, use test, non-acnegenic, non-comedogenic, and sensitive skin. 收起 | ||
| Jar Packaging | LB Processors | Our automated packaging lines can accommodate plastic or glass jars in volumes of 1/4 oz. to 1 gallon. We offer a broad range of services to include filling, capping, induction, batch coding, labeling, and shrink-wrap sealing for your bulk pack or case p...展開 Our automated packaging lines can accommodate plastic or glass jars in volumes of 1/4 oz. to 1 gallon. We offer a broad range of services to include filling, capping, induction, batch coding, labeling, and shrink-wrap sealing for your bulk pack or case pack product needs. 收起 | ||
| K-Series | Buhler Grinding & Dispersing Technologies | K系列適用於從低到非常高粘度的各種產品。研磨機的尺寸滿足從實驗室用途到大型生產用途，很適合用於放大實驗。其核心部件為一個錐形攪拌器，通過離心作用減小分離間隙，能強烈冷卻定子和轉子。選擇特殊材料可實現無污染加工。 |  |
|
| Karl Fischer (Moisture Content) | Robertson Microlit Laboratories | Karl Fischer quantitatively measures moisture content (approximately 0.10%-5%) in liquids or solids in the range of 10 micrograms to 10 mg of water using 3-10 mg of material. | ||
| LA-300 - Portable Routine Laser Diffraction Analyzer | HORIBA Instruments, Inc. | The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...展開 The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. 收起 |  |
|
| LA-950 - High Performance Laser Diffraction Analyzer | HORIBA Instruments, Inc. | LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...展開 LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. 收起 |  |
|
| Lab Analysis Services | Univar Solutions Lab Services | Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Servi...展開 Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Services) offering for product testing services. Univar Solutions has designed a state-of-the-art chemical analysis and product testing lab that is now able to service a variety of industries and applications. 收起 | ||
| Label Reviews | Burdock Group | Burdock Group can provide an analysis of your product’s label to identify any gaps in compliance of that label in the country or countries that the product is being marketed. In the U.S., Burdock Group can give you an in-depth analysis of all substances o...展開 Burdock Group can provide an analysis of your product’s label to identify any gaps in compliance of that label in the country or countries that the product is being marketed. In the U.S., Burdock Group can give you an in-depth analysis of all substances on your label and their regulatory status, the nutrition content, claims, and everything that you need to do in order to guarantee that your label is compliant with both Food and Drug Administration (FDA) and Federal Trade Commission (FTC) regulations. 收起 | ||
| Laboratory Mini-Cutters | Munson Machinery Co., Inc. | Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same ma...展開 Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same materials and offer similar size reduction characteristics but at lower capacities. Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. 收起 |  |
|
| Laboratory Services | Proteko d.o.o. | A modern laboratory, certified according to ISO 9000:2015 and accredited for testing cosmetic products, can perform all the tests necessary for placing cosmetic products on the EU market as well as on other markets. | ||
| Large Block Shredders | Munson Machinery Co., Inc. | The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad ...展開 The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad variety of materials, including the most difficult-to-shred products. The conical tips have an interference fit into receiver slots for rapid replacement. 收起 |  |
|
| LCS-111 | Konica Minolta Sensing Americas, Inc. | The LCS-111 spectrophotometer is a bench-top model that accurately and precisely measures and evaluates the clearness of liquids. This spectrophotometer has a color touch screen that can display spectral graphs. It can measure a wide range of applications...展開 The LCS-111 spectrophotometer is a bench-top model that accurately and precisely measures and evaluates the clearness of liquids. This spectrophotometer has a color touch screen that can display spectral graphs. It can measure a wide range of applications with its 22 integrated color scales, including Gardner, APHA or Hazen, ASTM D1500, and Pharmacopoeia and can evaluate them even after they have been stored. It is easy-to-use with automatic reminders for calibration, service and when to replace test filters. 收起 |  |
|
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滾球式粘度計，通過透明或不透明的液體根據Hoepple的落球原則計算球的滾動時間。該方法只需要400微升的液體。結果可通過運動學粘度和動力學粘度呈現。該粘度計簡潔經濟，可節省實驗室的空間。是Anton Paar’s AMVn自動粘度計的更新版本。 |  |
|
| Luminaires Controlled Lighting | Konica Minolta Sensing Americas, Inc. | Luminaires Controlled Lighting is a precise light source that provides several standardized light sources for Large Sample Visual Evaluation. The control panel provides "instant on" light source selection with automatic timing and sequencing. With the GLE...展開 Luminaires Controlled Lighting is a precise light source that provides several standardized light sources for Large Sample Visual Evaluation. The control panel provides "instant on" light source selection with automatic timing and sequencing. With the GLE-M series offers remote control of up to 8 overhead luminaries. 收起 |  |
|
| Maintenance | Buhler Grinding & Dispersing Technologies | 即使是最精良和可靠的機器和設備都需要定期的保養維護，Buhler公司為您提供度身定制的全面保養服務。關於此項服務的詳情，請點擊上面的“銷售和技術支持”請求鏈接 | ||
| Manual Filling Machine for Pastes, Creames Type VH 150 | Würschum GmbH | Manual Filling Machine for Pastes, Creames Type VH 150 is a filling range from 10 – 150 ml, exchange set for small filling volumes from 3-15 ml available. Tube filling nozzles, agitator and heatable hopper optional. |  |
|
| Manual Screwers SPH2-DE/SEH2-DE | Würschum GmbH | Manual Screwers SPH2-DE/SEH2-DE is SPH-2-DE (pneumatically) and SEH-2-DE (electrically). Suitable for screw caps and press caps for safe and exact torque capping jars, bottles, containers, cans etc. |  |
|
| Manual Srewer SPH2/SEH2 | Würschum GmbH | Manual Srewer SPH2/SEH2 is SPH-2 (pneumatically) and SEH-2 (electrically). Suitable for smaller bottles with screw caps, for safe and exact torque capping, for jars, bottles, containers, cans etc. |  |
|
| Manufacturing & Logistics | Buhler Grinding & Dispersing Technologies | Buhler制造和物流公司是Buhler的一個獨立部門，在市場上作為獨立組織進行運作。它可為外部客戶和Buhler全球業務單位提供有競爭力的的機器和工廠部件。Buhler公司全球雇員超過1700名，每年創造約4億瑞士法郎的營業額。關於此項服務的詳情，請點擊上面的“銷售和技術支持”請求鏈接 | ||
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 該新的MCR流變儀擁有最新的技術。EC運動技術，低摩擦的軸承以及專利的正交力傳感器經過多年的優化可滿足最高的流變要求。任何類型的或組合的流變測試，轉動或振動模式，都可用MCR流變儀測量。該系統的模塊化設計，可適合寬廣的溫度范圍的裝置和特定程序的應用。 |  |
|
| Media Milling | Custom Processing Services, Inc. | CPS offers a wide range of Media Mills from Laboratory to full Production scale. Uniform particle size distribution in the micron & submicron (or nanometer) size range. These milss are charged with small spheres or beads, activated by a high-speed agitato...展開 CPS offers a wide range of Media Mills from Laboratory to full Production scale. Uniform particle size distribution in the micron & submicron (or nanometer) size range. These milss are charged with small spheres or beads, activated by a high-speed agitator shaft to create mechanical hydraulic shearing. The forces tear apart the solids suspended in a liquid as they are pumped through the grinding chamber. 收起 | ||
| Metals Analysis (ICP‐OES & ICP‐MS) | Robertson Microlit Laboratories | RML can detect and accurately quantitate trace metal species at percent, ppm, ppb, and in some cases ppt levels through the use of plasma-based instrumentation techniques such as ICP-OES and ICP-MS. | ||
| Method Development & Validation Services | Robertson Microlit Laboratories | We understand that analytical development and validation are extremely important in the developmental stages of innovative products. Analytical methods must be validated to provide reliable data for regulatory submissions. | ||
| Micro Tri-Gloss 268 | Konica Minolta Sensing Americas, Inc. | The Micro Tri-Gloss 268 is an ultra compact portable device that measures the gloss condition of object surfaces from three measuring angles in full accordance with ISO, ASTM, DIN, BS and JIS norms. It can store and use up to 999 measurements taken from 2...展開 The Micro Tri-Gloss 268 is an ultra compact portable device that measures the gloss condition of object surfaces from three measuring angles in full accordance with ISO, ASTM, DIN, BS and JIS norms. It can store and use up to 999 measurements taken from 20°, 60° and 85°. It has two operation keys that control language settings, calibration, measurement, and statistics. 收起 |  |
|
| MicroMedia® | Buhler Grinding & Dispersing Technologies | 小容量環形攪拌珠磨機，具有可變功率密度從0.1∼4kW/l。專門為可靠使用微型研磨珠而設計。研磨珠集中在漩渦的外部環層，通過它產品軸向流動。 MicroMedia®的優點在於能強烈冷卻外部定子以及內部轉子和定子之間的環形排料管 |  |
|
| Micronizing Mill Services | Custom Processing Services, Inc. | CPS's micronizing mill services grind to 2µ top size. They use economical, high capacity fluid bed micronizers from NETZSCH, Inc., a global leader in powder processing machinery design and manufacturing. The mills are resistant to abrasion and have stainl...展開 CPS's micronizing mill services grind to 2µ top size. They use economical, high capacity fluid bed micronizers from NETZSCH, Inc., a global leader in powder processing machinery design and manufacturing. The mills are resistant to abrasion and have stainless contact. 收起 | ||
| MicroTroughXL | Kibron Inc. | MicroTroughXL has all the properties of the original MTXS, but can be also used with extended, larger area troughs for more precise recording of compression isotherms. With the accessories of your choice you can build your own complete Langmuir- and Langm...展開 MicroTroughXL has all the properties of the original MTXS, but can be also used with extended, larger area troughs for more precise recording of compression isotherms. With the accessories of your choice you can build your own complete Langmuir- and Langmuir-Blodgett laboratory. It is recommended for recording surface pressure and isotherms, studying the organization and functions of lipid rafts, and the penetration of drugs and peptides into monolayers. 收起 |  |
|
| Mini-Mixers | Munson Machinery Co., Inc. | Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant a...展開 Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant and small production applications, including pre-blends. for laboratories, pilot plants and small production runs including pre-blends. 收起 |  |
|
| MM-1e Controlled Lighting | Konica Minolta Sensing Americas, Inc. | MM-1e Controlled Lighting is a compact, viewing system for color assessment and comparison. It offers three standard light sources, Artificial Daylight, Store Light, Home Light, with an option of Ultraviolet. The MM-1e is easy-to-use with individual rocke...展開 MM-1e Controlled Lighting is a compact, viewing system for color assessment and comparison. It offers three standard light sources, Artificial Daylight, Store Light, Home Light, with an option of Ultraviolet. The MM-1e is easy-to-use with individual rocker switches for each light source and an optional elapsed time meter to monitor the usage of the daylight source. 收起 |  |
|
| MM-4e Controlled Lighting | Konica Minolta Sensing Americas, Inc. | MM-4e Controlled Lighting is a compact, viewing system for color assessment and comparison. It offers five standard light sources, Artificial Daylight, Store Light, Home Light, Your Choice, and Ultraviolet. It also has a built-in Daylight lamp timer to mo...展開 MM-4e Controlled Lighting is a compact, viewing system for color assessment and comparison. It offers five standard light sources, Artificial Daylight, Store Light, Home Light, Your Choice, and Ultraviolet. It also has a built-in Daylight lamp timer to monitor the usage of the daylight source. The MM-4e includes illuminated push buttons and is easily programmable to provide one touch automatic light source sequencing. 收起 |  |
|
| MoistureMeterD | Delfin Technologies | MoistureMeterD is a totally non-invasive device that takes local measurements on virtually all areas of the body. It probes for different measurement depths up to 5 mm. It is fully portable with a rechargeable battery and is able to wirelessly connect to ...展開 MoistureMeterD is a totally non-invasive device that takes local measurements on virtually all areas of the body. It probes for different measurement depths up to 5 mm. It is fully portable with a rechargeable battery and is able to wirelessly connect to a PC. This instrument is composed of a measuring unit and four probes for different measurement depths from 0.5mm to 5mm in effective measurement depths. 收起 |  |
|
| MoistureMeterD Compact | Delfin Technologies | MoistureMeterD Compact gives a highly sensitive measurement of water content and edema in skin. It gives non-invasive local measurements on virtually all areas of the body. It is fully portable with a rechargeable battery. This instrument has a built-in p...展開 MoistureMeterD Compact gives a highly sensitive measurement of water content and edema in skin. It gives non-invasive local measurements on virtually all areas of the body. It is fully portable with a rechargeable battery. This instrument has a built-in pressure sensor for user independent measurements. MoistureMeterD Compact generates a high frequency, low power electromagnetic (EM) wave which the tissue is exposed to. The reflected EM wave is registered and the obtained value is a dielectric constant, which is proportional to the water content of the measured tissue. This TDC (tissue dielectric constant) value is converted to water percentage and displayed on the screen. The value increases with increasing water content and edema. 收起 |  |
|
| MoistureMeterEpiD | Delfin Technologies | MoistureMeterEpiD provides highly sensitive measurement of hydration changes down to the epidermal layer. These sensitive, accurate, and reliable measurements can be taken on virtually all areas of the body. This tool is fully portable with rechargeable b...展開 MoistureMeterEpiD provides highly sensitive measurement of hydration changes down to the epidermal layer. These sensitive, accurate, and reliable measurements can be taken on virtually all areas of the body. This tool is fully portable with rechargeable battery, connects wireless to PC, and is extremely practical to use. 收起 | ||
| MoistureMeterSC | Delfin Technologies | MoistureMeterSC gives sensitive, accurate and reliable skin surface hydration measurements. It is non-sensitive to electrolytes and has a built-in pressure sensor for user independent measurements. It is fully portable and battery operated. This instrumen...展開 MoistureMeterSC gives sensitive, accurate and reliable skin surface hydration measurements. It is non-sensitive to electrolytes and has a built-in pressure sensor for user independent measurements. It is fully portable and battery operated. This instrument is an all-in-one unit that comprises a sensitive round probe head, a built-in contact pressure sensor and a graphic display screen. 收起 |  |
